101602-8471 ZEXEL 9 400 613 118 BOSCH INJECTION-PUMP ASSEMBLY 9400613118 1016028471 1156032471


101602-8471 INJECTION-PUMP ASSEMBLY
Rating:
8
Buy INJECTION-PUMP ASSEMBLY 101602-8471 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 613 118 9400613118
ZEXEL 101602-8471 1016028471
ISUZU 1156032471 1156032471

Service parts 101602-8471 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-6440
3. GOVERNOR 105411-1901
4. SUPPLY PUMP 105220-6240
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105661-3230
7. COUPLING PLATE 156639-3020
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-4170
11. Nozzle and Holder 1-15300-331-0
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105030-4361
14. NOZZLE 105025-0290
15. NOZZLE SET

Include in #1:

101602-8471 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 613 118 9400613118
ZEXEL 101602-8471 1016028471
ISUZU 1156032471 1156032471


Zexel num
Bosch num
Firm num
Name
101602-8471 
101602-8870 
9 400 613 118 
1156032471  ISUZU
INJECTION-PUMP ASSEMBLY
6BG1-T K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4920
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9
Pump speed r/min   1250 1250 1250
Average injection quantity mm3/st.   102.5 101 104
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Boost pressure kPa   61.3 61.3
Boost pressure mmHg   460 460
Injection quantity adjustment_02
Adjusting point   C
Rack position   5.9+-0.5
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   10 8.7 11.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   D
Rack position   R1-0.35
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   82.5 78.5 86.5
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_04
Adjusting point   E
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   105 100 110
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   500 500 500
Rack position   R1-0.35
Boost pressure kPa   34.7 30.7 38.7
Boost pressure mmHg   260 230 290
Boost compensator adjustment_02
Pump speed r/min   500 500 500
Rack position   R1(9)
Boost pressure kPa   48 41.3 54.7
Boost pressure mmHg   360 310 410

Test data Ex:

Governor adjustment

Test data 101602-8471
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting (6)Boost compensator stroke: BCL
----------
K=8 BCL=0.35+-0.1mm
----------

Speed control lever angle

Test data 101602-8471
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=8deg+-5deg b=26deg+-5deg

Stop lever angle

Test data 101602-8471
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery)
----------
aa=0r/min bb=1-0.5mm
----------
a=32deg+-5deg b=(55deg)

0000001501 TAMPER PROOF

Test data 101602-8471
Tamperproofing-equipped boost compensator cover installation procedure (A) After adjusting the boost compensator, tighten the bolts to remove the heads. (1)Before adjusting the governor and the boost compensator, tighten the screw to the specified torque. (Tightening torque T = T1 maximum) (2)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads. (Tightening torque T = T2)
----------
T1=2.5N-m(0.25kgf-m) T2=2.9~4.4N-m(0.3~0.45kgf-m)
----------

Timing setting

Test data 101602-8471
(1)Pump vertical direction (2)Position of coupling's threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(20deg)




Have questions with 101602-8471?





Group cross 101602-8471 ZEXEL

Isuzu 

 
1156032350 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 610 626 
1156032290 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 610 627 
1156032320 
INJECTION-PUMP ASSEMBLY
6BG1-TQB
9 400 610 628 
1156032330 
INJECTION-PUMP ASSEMBLY
6BG1-TQB
9 400 612 528 
1156032331 
INJECTION-PUMP ASSEMBLY
6BG1-TQB
9 400 610 629 
1156032230 
INJECTION-PUMP ASSEMBLY
6BG1-TQA
9 400 612 529 
1156032231 
INJECTION-PUMP ASSEMBLY
6BG1-TQA
9 400 610 630 
1156032411 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 614 939 
1156032510 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156032470 
INJECTION-PUMP ASSEMBLY
6BG1-T
101602-8471  

101602-8870 
9 400 613 118 
1156032471 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 610 631 
1156032440 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 611 589 
1156032590 
INJECTION-PUMP ASSEMBLY
6BG1-TQN
Back to top