101602-8370 ZEXEL 9 400 610 624 BOSCH INJECTION-PUMP ASSEMBLY 9400610624 1016028370 1156032200


101602-8370 INJECTION-PUMP ASSEMBLY
Rating:
71
Buy INJECTION-PUMP ASSEMBLY 101602-8370 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 624 9400610624
ZEXEL 101602-8370 1016028370
ISUZU 1156032200 1156032200

Service parts 101602-8370 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-6440
3. GOVERNOR 105411-1850
4. SUPPLY PUMP 105220-6240
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105661-3230
7. COUPLING PLATE 156639-0320
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-4170
11. Nozzle and Holder 1-15300-331-0
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105030-4361
14. NOZZLE 105025-0290
15. NOZZLE SET

Include in #1:

101602-8370 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 624 9400610624
ZEXEL 101602-8370 1016028370
ISUZU 1156032200 1156032200


Zexel num
Bosch num
Firm num
Name
101602-8370 
9 400 610 624 
1156032200  ISUZU
INJECTION-PUMP ASSEMBLY
6BG1-T K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4920
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.2
Pump speed r/min   1250 1250 1250
Average injection quantity mm3/st.   106.5 105 108
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Boost pressure kPa   61.3 61.3
Boost pressure mmHg   460 460
Injection quantity adjustment_02
Adjusting point   C
Rack position   5.9+-0.5
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   10 8.7 11.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   D
Rack position   R1-1.2
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   50.5 46.5 54.5
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_04
Adjusting point   E
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   90 85 95
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   500 500 500
Rack position   R1-1.2
Boost pressure kPa   4 4 8
Boost pressure mmHg   30 30 60
Boost compensator adjustment_02
Pump speed r/min   500 500 500
Rack position   R1(9.2)
Boost pressure kPa   48 41.3 54.7
Boost pressure mmHg   360 310 410

Test data Ex:

Governor adjustment

Test data 101602-8370
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting (6)Boost compensator stroke: BCL
----------
K=9 BCL=1.2+-0.1mm
----------

Speed control lever angle

Test data 101602-8370
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=9deg+-5deg b=26deg+-5deg

Stop lever angle

Test data 101602-8370
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery)
----------
aa=0r/min bb=1-0.5mm
----------
a=32deg+-5deg b=(55deg)

0000001501 TAMPER PROOF

Test data 101602-8370
Tamperproofing-equipped boost compensator cover installation procedure (A): After adjusting the boost compensator, assemble then tighten the bolts to remove the heads. (B): Specified torque (1)Before adjusting the governor and the boost compensator, tighten the screw to the specified torque. (Tightening torque T = T1 maximum) (2)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads. (Tightening torque T = T2)
----------
T1=2.5N-m(0.25kgf-m) T2=2.9~4.4N-m(0.3~0.45kgf-m)
----------

Timing setting

Test data 101602-8370
(1)Pump vertical direction (2)Position of coupling's threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(20deg)




Have questions with 101602-8370?





Group cross 101602-8370 ZEXEL

Isuzu 

9 400 614 937 
1156031100 
INJECTION-PUMP ASSEMBLY
6BB1
9 400 614 938 
 
INJECTION-PUMP ASSEMBLY
6BB1

Isuzu 

9 400 614 938 
1156031110 
INJECTION-PUMP ASSEMBLY
6BB1
9 400 610 619 
1156031570 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 610 620 
1156031370 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 610 621 
1156031590 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156031970 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 610 622 
1156031971 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 610 623 
1156031980 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 612 364 
1156031981 
INJECTION-PUMP ASSEMBLY
6BG1-T
101602-8370  
9 400 610 624 
1156032200 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 610 625 
1156032211 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156032212 
INJECTION-PUMP ASSEMBLY
6BG1QF
 
1156032220 
INJECTION-PUMP ASSEMBLY
6BG1-TQV
 
1156032221 
INJECTION-PUMP ASSEMBLY
6BG1-TQV
9 400 612 417 
1156032222 
INJECTION-PUMP ASSEMBLY
6BG1-TQV
Back to top