101602-7940 ZEXEL 9 400 610 605 BOSCH INJECTION-PUMP ASSEMBLY 9400610605 1016027940 1156031450


101602-7940 INJECTION-PUMP ASSEMBLY
Rating:
15
Buy INJECTION-PUMP ASSEMBLY 101602-7940 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 605 9400610605
ZEXEL 101602-7940 1016027940
ISUZU 1156031450 1156031450

Service parts 101602-7940 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101062-8050
3. GOVERNOR 105419-2250
4. SUPPLY PUMP 105220-6300
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156639-0520
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-6682
11. Nozzle and Holder 1-15300-291-2
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105030-4361
14. NOZZLE 105015-4740
15. NOZZLE SET

Include in #1:

101602-7940 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 605 9400610605
ZEXEL 101602-7940 1016027940
ISUZU 1156031450 1156031450


Zexel num
Bosch num
Firm num
Name
101602-7940 
9 400 610 605 
1156031450  ISUZU
INJECTION-PUMP ASSEMBLY
6BG1 K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4920
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9
Pump speed r/min   1250 1250 1250
Average injection quantity mm3/st.   72.5 71 74
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.1+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   8 6.7 9.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   105 100 110
Fixing the lever   *
Rack limit   *

Test data Ex:

Governor adjustment

Test data 101602-7940
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting
----------
K=12
----------

Speed control lever angle

Test data 101602-7940
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(19deg)+-5deg b=(23deg)+-5deg

Stop lever angle

Test data 101602-7940
N:Pump normal S:Stop the pump.
----------

----------
a=12deg+-5deg b=46deg+-5deg

Timing setting

Test data 101602-7940
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(90deg)




Have questions with 101602-7940?





Group cross 101602-7940 ZEXEL

Isuzu 

 
1156031350 
INJECTION-PUMP ASSEMBLY
6BG1-TQJ
9 400 610 602 
1156031351 
INJECTION-PUMP ASSEMBLY
6BG1-TQJ
9 400 610 603 
1156031380 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 610 604 
1156031520 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156031410 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 614 916 
1156031411 
INJECTION-PUMP ASSEMBLY
6BG1
101602-7940  
9 400 610 605 
1156031450 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 610 606 
1156031420 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 610 607 
1156030660 
INJECTION-PUMP ASSEMBLY
6BD1-T
9 400 610 608 
1156031440 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 610 609 
1156030780 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156030790 
INJECTION-PUMP ASSEMBLY
6BD1
Back to top