101602-4751 ZEXEL 9 400 611 990 BOSCH INJECTION-PUMP ASSEMBLY 9400611990 1016024751 1156021391


101602-4751 INJECTION-PUMP ASSEMBLY
Rating:
12
Buy INJECTION-PUMP ASSEMBLY 101602-4751 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 990 9400611990
ZEXEL 101602-4751 1016024751
ISUZU 1156021391 1156021391

Service parts 101602-4751 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-8900
3. GOVERNOR 105410-3770
4. SUPPLY PUMP 105220-4561
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156637-8820
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5023
11. Nozzle and Holder 1-15300-106-2
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105030-3201
14. NOZZLE 105015-4630
15. NOZZLE SET

Include in #1:

101602-4751 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 611 990 9400611990
ZEXEL 101602-4751 1016024751
ISUZU 1156021391 1156021391


Zexel num
Bosch num
Firm num
Name
101602-4751 
9 400 611 990 
1156021391  ISUZU
INJECTION-PUMP ASSEMBLY
6BD1 K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.2 3.15 3.25
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.9
Pump speed r/min   1430 1430 1430
Average injection quantity mm3/st.   90 88.5 91.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.9+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   8 6.7 9.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101602-4751
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Set idle sub-spring (3)Main spring setting
----------
K=13--
----------

Speed control lever angle

Test data 101602-4751
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(19deg)+-5deg b=(32deg)+-5deg

Stop lever angle

Test data 101602-4751
N:Pump normal S:Stop the pump.
----------

----------
a=12deg+-5deg b=46deg+-5deg

Timing setting

Test data 101602-4751
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=19deg
----------
a=(90deg)




Have questions with 101602-4751?





Group cross 101602-4751 ZEXEL

Isuzu 

9 400 614 847 
1156021260 
INJECTION-PUMP ASSEMBLY
6BG1T
 
1156021370 
INJECTION-PUMP ASSEMBLY
6SA1T
 
1156021540 
INJECTION-PUMP ASSEMBLY
6SA1T
 
1156021541 
INJECTION-PUMP ASSEMBLY
6SA1T
9 400 614 848 
1156021542 
INJECTION-PUMP ASSEMBLY
6SA1T
 
1156021390 
INJECTION-PUMP ASSEMBLY
6BD1
101602-4751  
9 400 611 990 
1156021391 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156021650 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 614 849 
1156021860 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 614 850 
1156021740 
INJECTION-PUMP ASSEMBLY
6BD1T
 
1156021830 
INJECTION-PUMP ASSEMBLY
6BD1
Back to top