101602-4510 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016024510 1156018231


101602-4510 INJECTION-PUMP ASSEMBLY
Rating:
70
Buy INJECTION-PUMP ASSEMBLY 101602-4510 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101602-4510 1016024510
ISUZU 1156018231 1156018231

Cross reference number

ZEXEL 101602-4510 1016024510
ISUZU 1156018231 1156018231


Zexel num
Bosch num
Firm num
Name
101602-4510 
101602-4512 
 
1156018231  ISUZU
INJECTION-PUMP ASSEMBLY
6BG1T *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.8
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   85.3 83.8 86.8
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   5.2+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   12.1 10.8 13.4
Max. variation between cylinders %   0 -14 14
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101602-4510
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Set idle sub-spring (3)Main spring setting
----------
K=10
----------

Speed control lever angle

Test data 101602-4510
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=3deg+-5deg b=21deg+-5deg

Stop lever angle

Test data 101602-4510
N:Pump normal S:Stop the pump.
----------

----------
a=12deg+-5deg b=46deg+-5deg

Timing setting

Test data 101602-4510
(1)Pump vertical direction (2)Position of flywheel's threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=13deg
----------
a=(10deg)




Have questions with 101602-4510?





Group cross 101602-4510 ZEXEL

Isuzu 

9 400 614 840 
1156018670 
INJECTION-PUMP ASSEMBLY
6BD1T
101602-4510  

101602-4512 
 
1156018231 
INJECTION-PUMP ASSEMBLY
6BG1T
 
1156018232 
INJECTION-PUMP ASSEMBLY
6BG1T
9 400 610 172 
1156018233 
INJECTION-PUMP ASSEMBLY
6BG1T
9 400 610 249 
1156020430 
INJECTION-PUMP ASSEMBLY
6BD1T
 
1156020400 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156020410 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 614 841 
1156020411 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 619 596 
1156020420 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156020050 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156020440 
INJECTION-PUMP ASSEMBLY
6BD1T
 
1156020441 
INJECTION-PUMP ASSEMBLY
6BD1T
 
1156020442 
INJECTION-PUMP ASSEMBLY
6BD1T
9 400 611 322 
1156020443 
INJECTION-PUMP ASSEMBLY
6BD1-T
 
1156020460 
INJECTION-PUMP ASSEMBLY
6BD1T
 
1156020461 
INJECTION-PUMP ASSEMBLY
6BD1T
9 400 612 775 
1156020462 
INJECTION-PUMP ASSEMBLY
6BD1T
 
1156020450 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 614 842 
1156020451 
INJECTION-PUMP ASSEMBLY
6BD1
Back to top