101602-4130 ZEXEL 9 400 614 830 BOSCH INJECTION-PUMP ASSEMBLY 9400614830 1016024130 1156015592

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101602-4130 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 830 9400614830

ZEXEL 101602-4130 1016024130

ISUZU 1156015592 1156015592

Service parts 101602-4130 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-8710

3. GOVERNOR 105410-5320

4. SUPPLY PUMP 105220-7260

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE 156636-5520

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-4821

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 18.1(185)

13. NOZZLE-HOLDER 105031-3611

14. NOZZLE

105015-4130

15. NOZZLE SET

Include in #1:

101402-7110 as _

101602-4130 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 614 830 9400614830

ZEXEL 101602-4130 1016024130

ISUZU 1156015592 1156015592

Zexel num

Bosch num

Firm num

Name

101602-4130
101602-7000

9 400 614 830

1156015592 ISUZU

INJECTION-PUMP ASSEMBLY
6BD1T K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.2 3.15 3.25

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 8.3

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 61.5 60 63

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point B

Rack position 5.6+-0.5

Pump speed r/min 325 325 325

Average injection quantity mm3/st. 10.2 8.9 11.5

Max. variation between cylinders % 0 -14 14

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Main spring setting (3)Set idle sub-spring
----------
K=9
----------

Speed control lever angle

F:Full speed I:Idle D:Dead point
----------

----------
a=18deg+-1deg b=27deg+-5deg c=20deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=2.5deg+-5deg b=46deg+-5deg

0000001501 LEVER

1. Variable lever adjustment (1)Fix lever (B) in the beginning of speed increase position using bolts (C) and (D). (2)Fix using the bolt E so that the lever A is aa. (3)Lock using bolt (G). (4)After completing idle adjustment, loosen the full side stopper bolt (D). (5)Move the lever (A) in the full speed direction. (6)Fix bolt (D) at full speed position. (7)Finally, measure the lever angle and set the idle stopper bolt (C) stop position.
----------
aa=18deg+-1deg
----------

Timing setting

(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(90deg)