101602-3670 ZEXEL 9 400 614 824 BOSCH INJECTION-PUMP ASSEMBLY 9400614824 1016023670 6136721450

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101602-3670 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 824 9400614824

ZEXEL 101602-3670 1016023670

KOMATSU 6136721450 6136721450

Service parts 101602-3670 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-2470

3. GOVERNOR 105410-6380

4. SUPPLY PUMP 105210-4570

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105661-0371

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-5420

11. Nozzle and Holder 6-13612-310-0

12. Open Pre:MPa(Kqf/cm2) 22.1(225)

13. NOZZLE-HOLDER 105031-4480

14. NOZZLE 105015-5010

15. NOZZLE SET

Include in #1:

101401-7292 as _

101602-3670 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 614 824 9400614824

ZEXEL 101602-3670 1016023670

KOMATSU 6136721450 6136721450

Zexel num

Bosch num

Firm num

Name

101602-3670

9 400 614 824

6136721450 KOMATSU

INJECTION-PUMP ASSEMBLY
6D105 K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.3 3.25 3.35

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 7.6

Pump speed r/min 1175 1175 1175

Average injection quantity mm3/st. 32.2 31.2 33.2

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 8+-0.5

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 9.5 8.5 10.5

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL (3)Rack difference between N = N1 and N = N2 (4)Rack difference between N = N3 and N = N4 (5)Rack difference between N = N5 and N = N6.
----------
K=16 RAL=14.2+-0.2mm N1=1175r/min N2=1000r/min N3=1175r/min N4=750r/min N5=1175r/min N6=500r/min
----------