Fuel injectors
  1. Home
  2. injection
  3. #1016023400

101602-3400 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016023400 6136711450


101602-3400 INJECTION-PUMP ASSEMBLY
Rating:
22
Buy INJECTION-PUMP ASSEMBLY 101602-3400 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101602-3400 1016023400
KOMATSU 6136711450 6136711450

Cross reference number

ZEXEL 101602-3400 1016023400
KOMATSU 6136711450 6136711450


Zexel num
Bosch num
Firm num
Name
101602-3400 
 
6136711450  KOMATSU
INJECTION-PUMP ASSEMBLY
SL6D105 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8
Pump speed r/min   1175 1175 1175
Average injection quantity mm3/st.   35.5 34.5 36.5
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   8.5+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   11 9 13
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101602-3400
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL
----------
K=15 RAL=15+0.5mm
----------

Speed control lever angle

Test data 101602-3400
F:Full speed I:Idle S:Stop
----------

----------
a=17deg+-5deg b=22deg+-5deg c=32deg+-3deg




Have questions with 101602-3400?





Group cross 101602-3400 ZEXEL

Komatsu 

101602-3400  
 
6136711450 
INJECTION-PUMP ASSEMBLY
SL6D105
101602-3410  
 
6136711440 
INJECTION-PUMP ASSEMBLY
SL6D105
101602-3420  

101605-3520 
9 400 612 198 
6136721100 
INJECTION-PUMP ASSEMBLY
6D105
101602-3421  
 
 
INJECTION-PUMP ASSEMBLY
6D105
101602-3430  
 
6136721110 
INJECTION-PUMP ASSEMBLY
6D105
101602-3440  

101602-3180 
 
6136721120 
INJECTION-PUMP ASSEMBLY
6D105
101602-3460  
F 019 Z10 012 
6136721310 
INJECTION-PUMP ASSEMBLY
6D105
101602-3470  

101605-3640 
9 400 610 205 
6136721410 
INJECTION-PUMP ASSEMBLY
6D105
101602-3471  
 
 
INJECTION-PUMP ASSEMBLY
6D105
101602-3480  

101605-3630 
 
6136721420 
INJECTION-PUMP ASSEMBLY
6D105
101602-3481  
 
 
INJECTION-PUMP ASSEMBLY
6D105
101602-3490  
 
6136721430 
INJECTION-PUMP ASSEMBLY
6D105
101602-3491  
 
 
INJECTION-PUMP ASSEMBLY
6D105
Back to top