Fuel injectors
  1. Home
  2. injection
  3. #1016023360

101602-3360 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016023360 6137711511


101602-3360 INJECTION-PUMP ASSEMBLY
Rating:
18
Buy INJECTION-PUMP ASSEMBLY 101602-3360 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101602-3360 1016023360
KOMATSU 6137711511 6137711511

Cross reference number

ZEXEL 101602-3360 1016023360
KOMATSU 6137711511 6137711511


Zexel num
Bosch num
Firm num
Name
101602-3360 
 
6137711511  KOMATSU
INJECTION-PUMP ASSEMBLY
SL6D105 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.4
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   51.5 50.5 52.5
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   8+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   10.5 9 12
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101602-3360
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Rack difference from N = N1 (4)Rack difference between N = N2 and N = N3
----------
K=15 N1=900r/min N2=900r/min N3=450r/min
----------

Speed control lever angle

Test data 101602-3360
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=30deg+-5deg b=6deg+-5deg

Stop lever angle

Test data 101602-3360
N:Pump normal S:Stop the pump.
----------

----------
a=27deg+-5deg b=53deg+-5deg




Have questions with 101602-3360?





Group cross 101602-3360 ZEXEL

Komatsu 

101602-3300  
 
6136711700 
INJECTION-PUMP ASSEMBLY
6D105
101602-3310  
9 400 614 818 
6137711500 
INJECTION-PUMP ASSEMBLY
S6D105
101602-3320  

101602-3321 
 
 
INJECTION-PUMP ASSEMBLY
SA6D110
101602-3321  
 
6138711460 
INJECTION-PUMP ASSEMBLY
SA6D110
101602-3330  
 
6136711531 
INJECTION-PUMP ASSEMBLY
6D105
101602-3340  
 
6136711541 
INJECTION-PUMP ASSEMBLY
6D105
101602-3350  
 
6137711510 
INJECTION-PUMP ASSEMBLY
SL6D105
101602-3360  
 
6137711511 
INJECTION-PUMP ASSEMBLY
SL6D105
101602-3370  
 
6136711130 
INJECTION-PUMP ASSEMBLY
6D105
101602-3380  
 
6137711410 
INJECTION-PUMP ASSEMBLY
S6D105
101602-3390  
 
6137711710 
INJECTION-PUMP ASSEMBLY
S6D105
Back to top