Fuel injectors
  1. Home
  2. injection
  3. #1016023170

101602-3170 ZEXEL 9 400 614 815 BOSCH INJECTION-PUMP ASSEMBLY 9400614815 1016023170 6136711512


101602-3170 INJECTION-PUMP ASSEMBLY
Rating:
17
Buy INJECTION-PUMP ASSEMBLY 101602-3170 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 815 9400614815
ZEXEL 101602-3170 1016023170
KOMATSU 6136711512 6136711512

Service parts 101602-3170 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-0870
3. GOVERNOR 105410-4990
4. SUPPLY PUMP 105210-1841
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105661-0330
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-4770
11. Nozzle and Holder 6130-11-3104
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105031-3390
14. NOZZLE 105015-2860
15. NOZZLE SET

Include in #1:

101481-0232 as _
101602-3170 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 614 815 9400614815
ZEXEL 101602-3170 1016023170
KOMATSU 6136711512 6136711512


Zexel num
Bosch num
Firm num
Name
101602-3170 
9 400 614 815 
6136711512  KOMATSU
INJECTION-PUMP ASSEMBLY
6D105 K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.9
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   48.5 47.5 49.5
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   8+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   12.5 11 14
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101602-3170
N:Pump speed R:Rack position (mm) (1)Target notch: K
----------
K=10
----------

Speed control lever angle

Test data 101602-3170
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=20deg+-5deg b=8deg+-5deg

Stop lever angle

Test data 101602-3170
N:Pump normal S:Stop the pump.
----------

----------
a=(27deg) b=(53deg)




Have questions with 101602-3170?





Group cross 101602-3170 ZEXEL

Komatsu 

101602-3101  
9 400 610 202 
6136711610 
INJECTION-PUMP ASSEMBLY
6D105
101602-3111  
9 400 614 809 
6137711610 
INJECTION-PUMP ASSEMBLY
S6D105
101602-3120  
9 400 614 810 
6137711401 
INJECTION-PUMP ASSEMBLY
S6D105
101602-3130  
9 400 614 811 
6136711310 
INJECTION-PUMP ASSEMBLY
6D105
101602-3140  
9 400 614 812 
6136711110 
INJECTION-PUMP ASSEMBLY
6D105
101602-3150  
9 400 614 813 
6137711310 
INJECTION-PUMP ASSEMBLY
S6D105
101602-3160  
9 400 614 814 
6136711520 
INJECTION-PUMP ASSEMBLY
6D105
101602-3170  
9 400 614 815 
6136711512 
INJECTION-PUMP ASSEMBLY
6D105
101602-3180  
 
6136711120 
INJECTION-PUMP ASSEMBLY
6D105
101602-3190  
 
6136711530 
INJECTION-PUMP ASSEMBLY
6D105
Back to top