101602-2390 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016022390 220203350a

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101602-2390 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101602-2390 1016022390

HINO 220203350A 220203350a

Service parts 101602-2390 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-9751

3. GOVERNOR 105400-4390

4. SUPPLY PUMP 105220-5140

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE 156636-4821

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105110-4230

11. Nozzle and Holder 23600-1580

12. Open Pre:MPa(Kqf/cm2) 21.6{220}

13. NOZZLE-HOLDER 105041-5030

14. NOZZLE 105015-5160

15. NOZZLE SET

Include in #1:

101602-2390 as INJECTION-PUMP ASSEMBLY

106671-4724 as _

Cross reference number

ZEXEL 101602-2390 1016022390

HINO 220203350A 220203350a

Zexel num

Bosch num

Firm num

Name

101602-2390
101602-2391

220203350A HINO

INJECTION-PUMP ASSEMBLY
W06D * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.1 3.05 3.15

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 10.5

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 52.1 50.1 54.1

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point B

Rack position 11.2

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 58.1 55.1 61.1

Max. variation between cylinders % 0 -4 4

Fixing the lever *

Injection quantity adjustment_03

Adjusting point C

Rack position 8+-0.5

Pump speed r/min 360 360 360

Average injection quantity mm3/st. 8.5 7 10

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Injection quantity adjustment_04

Adjusting point D

Rack position 13+-0.5

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 72 72 82

Fixing the lever *

Rack limit *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT (3)Rack difference between N = N1 and N = N2 (4)Set idle sub-spring (5)Main spring setting
----------
K=7 N1=750r/min N2=350r/min
----------

Speed control lever angle

F:Full speed I:Idle S:Stop (1)Set the pump speed at aa. ( At delivery ) (2)Set the pump speed at bb.
----------
aa=900r/min bb=750r/min
----------
a=(1deg)+-5deg b=32deg+-3deg c=(5deg)+-5deg d=(18deg)+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=27deg+-5deg b=53deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(70deg)