1. Home
  2. INJECTION
  3. 9 400 614 750

Buy 101602-1610 ZEXEL 9 400 614 750 BOSCH INJECTION-PUMP ASSEMBLY


101602-1610 INJECTION-PUMP ASSEMBLY
Rating:
14

Information injection-pump assembly

BOSCH 9 400 614 750 9400614750
ZEXEL 101602-1610 1016021610
MITSUBISHI ME078787 me078787

You can buy parts: .

PANGOLIN 6D16 6D16T Engine Rebuild Kit Engine Overhaul Rebuild Kit for Mitsubishi Engine Kato 1430 Excavator Aftermarket Parts
$1,089.90

25-06-2021
PANGOLIN 6D16 6D16T Engine Rebuild Kit Engine Overhaul Rebuild Kit for Mitsubishi Engine Kato 1430 Excavator Aftermarket Parts
PANGOLIN Interchange Part Number: ME072065 ME072445 ME078502 ME072570 ME072545 ME078787 ME300199 ME07200 ME072062 || Engine Number: for Mitsubishi 6D16 6D16T Engine || Note: OEM brand new for Kato 1430 excavator replacement parts || Delivery Time: We will ship the item to you by DHL/FedEx, which will arrive in 5-9 days once we ship it to you, even more earlier. The delivery time will not a month like which shown online, you could buy with confidence! || Warranty: 3 Month, we offer free exchange or return if there is our product quality problem during the warranty

Service parts 101602-1610 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101062-8040
3. GOVERNOR 105412-2371
4. SUPPLY PUMP 105210-5450
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156637-7220
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-4460
11. Nozzle and Holder ME078365
12. Open Pre:MPa(Kqf/cm2) 17.7{180}
13. NOZZLE-HOLDER 105030-3350
14. NOZZLE 105025-0800
15. NOZZLE SET

Include in #1:

101602-1610 as INJECTION-PUMP ASSEMBLY
106682-4510 as _
106682-4511

Cross reference number

BOSCH 9 400 614 750 9400614750
ZEXEL 101602-1610 1016021610
MITSUBISHI ME078787 me078787


Zexel num Bosch num Firm num Firm Name
101602-1610  9 400 614 750  ME078787  MITSUBISHI INJECTION-PUMP ASSEMBLY
6D16T K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:



Adjustment conditions Test oil   ISO4113 or {SEJ967d}
1404 Test oil
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe mm   6-2-600
Outer diameter - inner diameter - length (mm)
Overflow valve   131424-5620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)   L
Left


Injection timing adjustment Direction of rotation (viewed from drive side)   L
Left
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.5 4.45 4.55
Beginning of injection position   NO.1
Governor side
Difference between angles 1 deg.   60 59.5 60.5
Cal 1-5
Difference between angles 2 deg.   120 119.5 120.5
Cal 1-3
Difference between angles 3 deg.   180 179.5 180.5
Cal 1-6
Difference between angles 4 deg.   240 239.5 240.5
Cyl.1-2
Difference between angles 5 deg.   300 299.5 300.5
Cal 1-4


Injection quantity adjustment Adjusting point   A
Rack position   9.6
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   124 120.5 127.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *


Injection quantity adjustment_02 Adjusting point   -
Rack position   6.6+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   10.6 9.1 12.1
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks  
Adjust only variation between cylinders; adjust governor according to governor specifications.

Test data Ex:



Governor adjustment

Test data 101602-1610 N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Torque spring does not operate. (4)Set idle sub-spring
----------
K=13
----------



Speed control lever angle

Test data 101602-1610 F:Full speed I:Idle (1)Set the pump speed at aa. (At delivery) (2)Pump speed = bb (3)Stopper bolt setting
----------
aa=920r/min bb=755r/min
----------
a=0deg+-5deg b=6deg+-5deg c=24deg+-5deg



Stop lever angle

Test data 101602-1610 N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=26deg+-5deg b=53deg+-5deg



Timing setting

Test data 101602-1610 (1)Pump vertical direction (2)Position of coupling's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=11deg
----------
a=(1deg)





Have questions with 101602-1610?

toggle preview




Group cross 101602-1610 ZEXEL

Mitsubishi 

101602-1600  9 400 614 749  ME078726  INJECTION-PUMP ASSEMBLY
6D16T
101602-1610  9 400 614 750  ME078787  INJECTION-PUMP ASSEMBLY
6D16T
Back to top