101602-1580 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016021580

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101602-1580 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101602-1580 1016021580

Service parts 101602-1580 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101062-8280

3. GOVERNOR 105412-2450

4. SUPPLY PUMP 105210-4661

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE 156638-8120

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-6440

11. Nozzle and Holder ME047882

12. Open Pre:MPa(Kqf/cm2) 17.7{180}

13. NOZZLE-HOLDER 105030-3350

14. NOZZLE 105015-6230

15. NOZZLE SET

Include in #1:

101602-1580 as INJECTION-PUMP ASSEMBLY

106681-4152 as _

Cross reference number

ZEXEL 101602-1580 1016021580

Zexel num

Bosch num

Firm num

Name

101602-1580

INJECTION-PUMP ASSEMBLY
6D16T 14BF PE6AD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-5520

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 4.2 4.15 4.25

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 8.8

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 94.5 91 98

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point B

Rack position 6.4+-0.5

Pump speed r/min 325 325 325

Average injection quantity mm3/st. 9.5 8 11

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Torque spring does not operate. (4)Rack difference between N = N1 and N = N2 (5)Set idle sub-spring
----------
K=8 N1=700r/min N2=350r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Pump speed = aa (2)Pump speed = bb (3)Stopper bolt setting (4)Stopper bolt setting
----------
aa=900r/min bb=750r/min
----------
a=(3deg)+-5deg b=(19deg)+-5deg c=(5deg)+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=26deg+-5deg b=53deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of coupling's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=11deg
----------
a=(1deg)