101602-1320 ZEXEL F 019 Z10 823 BOSCH INJECTION-PUMP ASSEMBLY f019z10823 1016021320 me157337

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101602-1320 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z10 823 f019z10823

ZEXEL 101602-1320 1016021320

MITSUBISHI ME157337 me157337

Service parts 101602-1320 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-4900

3. GOVERNOR 105419-0390

4. SUPPLY PUMP 105210-4150

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105662-0590

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-6021

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 21.6(220)

13. NOZZLE-HOLDER 105030-5010

14. NOZZLE

105015-5390

15. NOZZLE SET

Include in #1:

101602-1320 as INJECTION-PUMP ASSEMBLY

101609-3830 as _

Cross reference number

BOSCH F 019 Z10 823 f019z10823

ZEXEL 101602-1320 1016021320

MITSUBISHI ME157337 me157337

Zexel num

Bosch num

Firm num

Name

101602-1320

F 019 Z10 823

ME157337 MITSUBISHI

INJECTION-PUMP ASSEMBLY
6D22 * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-4620

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 4.5 4.45 4.55

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 9.3

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 114.3 111.3 117.3

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 9

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 106.5 100.5 112.5

Fixing the rack *

Injection quantity adjustment_03

Adjusting point C

Rack position 6.9+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 14.6 12 17.2

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Injection quantity adjustment_04

Adjusting point D

Rack position 13+1

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 155 155 175

Fixing the lever *

Rack limit *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL (3)Idle sub spring setting: L1. (4)Setting at shipping (5)Rack difference between N = N1 and N = N2
----------
K=8 RAL=13+1mm L1=5+-0.1mm N1=750r/min N2=250r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting (2)At shipping (3)Set the pump speed at aa (4)Set the pump speed at bb.
----------
aa=750r/min bb=900r/min
----------
a=24deg+-5deg b=(2deg) c=1deg+-5deg d=5deg+-5deg