101602-1060 ZEXEL 9 400 614 712 BOSCH INJECTION-PUMP ASSEMBLY 9400614712 1016021060 me059605

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101602-1060 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 712 9400614712

ZEXEL 101602-1060 1016021060

MITSUBISHI ME059605 me059605

Service parts 101602-1060 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-2550

3. GOVERNOR 105410-7310

4. SUPPLY PUMP 105210-4150

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105662-0590

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-6021

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 21.6(220)

13. NOZZLE-HOLDER 105030-5010

14. NOZZLE

105015-5390

15. NOZZLE SET

Include in #1:

101602-1060 as INJECTION-PUMP ASSEMBLY

101609-3541 as _

Cross reference number

BOSCH 9 400 614 712 9400614712

ZEXEL 101602-1060 1016021060

MITSUBISHI ME059605 me059605

Zexel num

Bosch num

Firm num

Name

101602-1060

9 400 614 712

ME059605 MITSUBISHI

INJECTION-PUMP ASSEMBLY
6D22P * K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve opening pressure kPa 157 157 157

Overflow valve opening pressure kgf/cm2 1.6 1.6 1.6

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 4.5 4.45 4.55

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 8.9

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 92 90 94

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point B

Rack position 8+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 17.5 14.9 20.1

Max. variation between cylinders % 0 -14 14

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT: RAL (4)Set idle sub-spring (5)At shipping
----------
K=18 RAL=13+0.1mm
----------

Speed control lever angle

F:Full speed I:Idle S:Stop (1)Pump speed = aa (2)At shipping (3)Pump speed = bb
----------
aa=900r/min bb=760r/min
----------
a=24deg+-5deg b=32deg+-3deg c=2deg+-5deg d=(2deg) e=5deg+-5deg