101602-0210 ZEXEL 9 400 614 701 BOSCH INJECTION-PUMP ASSEMBLY 9400614701 1016020210 5156007932


101602-0210 INJECTION-PUMP ASSEMBLY
Rating:
13
Buy INJECTION-PUMP ASSEMBLY 101602-0210 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 701 9400614701
ZEXEL 101602-0210 1016020210
ISUZU 5156007932 5156007932

Service parts 101602-0210 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-8120
3. GOVERNOR 105410-3510
4. SUPPLY PUMP 105220-7260
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156635-3921
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4372
11. Nozzle and Holder 5-15300-103-2
12. Open Pre:MPa(Kqf/cm2) 14.7{150}
13. NOZZLE-HOLDER 105030-3391
14. NOZZLE 105015-3930
15. NOZZLE SET

Include in #1:

101602-0210 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 614 701 9400614701
ZEXEL 101602-0210 1016020210
ISUZU 5156007932 5156007932


Zexel num
Bosch num
Firm num
Name
101602-0210 
9 400 614 701 
5156007932  ISUZU
INJECTION-PUMP ASSEMBLY
6BD1 * K 14BE PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.4
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   67.3 66.3 68.3
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   8.7
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   58.9 56.9 60.9
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   6.5
Pump speed r/min   385 385 385
Average injection quantity mm3/st.   9.4 8.1 10.7
Max. variation between cylinders %   0 -14 14
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101602-0210
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Main spring setting (3)Set idle sub-spring (4)Set the torque control spring so that point B's injection quantity is as specified.
----------
K=10
----------

Speed control lever angle

Test data 101602-0210
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=5deg+-5deg b=25deg+-5deg

Stop lever angle

Test data 101602-0210
N:Pump normal S:Stop the pump.
----------

----------
a=12deg+-5deg b=46deg+-5deg

Timing setting

Test data 101602-0210
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(90deg)




Have questions with 101602-0210?





Group cross 101602-0210 ZEXEL

Isuzu 

 
 

12PB1
101602-0210  
9 400 614 701 
5156007932 
INJECTION-PUMP ASSEMBLY
6BD1
 
5156006842 
INJECTION-PUMP ASSEMBLY
6BD1
 
5156006494 
INJECTION-PUMP ASSEMBLY
6BD1
 
5156007262 
INJECTION-PUMP ASSEMBLY
6BD1
 
 
INJECTION-PUMP ASSEMBLY
12PA1
 
5156011090 
INJECTION-PUMP ASSEMBLY
6BB1
 
1156011134 
INJECTION-PUMP ASSEMBLY
6BB1
 
5156008591 
INJECTION-PUMP ASSEMBLY
6BB1
 
 
INJECTION-PUMP ASSEMBLY
12PB1
 
5156009352 
INJECTION-PUMP ASSEMBLY
6BB1
Back to top