101601-7550 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016017550 1156010681


101601-7550 INJECTION-PUMP ASSEMBLY
Rating:
36
Buy INJECTION-PUMP ASSEMBLY 101601-7550 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101601-7550 1016017550
ISUZU 1156010681 1156010681

Service parts 101601-7550 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-2611
3. GOVERNOR 105472-0970
4. SUPPLY PUMP 105210-4271
5. AUTOM. ADVANCE MECHANIS 105634-0090
6. COUPLING PLATE 105663-0250
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5442
11. Nozzle and Holder 1-15300-103-2
12. Open Pre:MPa(Kqf/cm2) 22.1{225}
13. NOZZLE-HOLDER 105031-3782
14. NOZZLE 105015-4390
15. NOZZLE SET

Include in #1:

101601-7550 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101601-7550 1016017550
ISUZU 1156010681 1156010681


Zexel num
Bosch num
Firm num
Name
101601-7550 
 
1156010681  ISUZU
INJECTION-PUMP ASSEMBLY
6QA2 * K 14BF PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   147 113 181
Overflow valve opening pressure kgf/cm2   1.5 1.15 1.85
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.7 3.65 3.75
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.2
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   111.5 109.5 113.5
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   11.6
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   115 114 116
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   8.6+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   11.5 9.2 13.8
Max. variation between cylinders %   0 -13 13
Fixing the rack   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   14.2+-0. 5
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   140 140
Fixing the lever   *
Remarks
After startup boost setting
 
Timer adjustment
Pump speed r/min   925
Advance angle deg.   0.3
Timer adjustment_02
Pump speed r/min   975
Advance angle deg.   1.4 0.1 1.4
Timer adjustment_03
Pump speed r/min   1050
Advance angle deg.   2.4 1.9 2.9
Timer adjustment_04
Pump speed r/min   1150
Advance angle deg.   5 4.5 5.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101601-7550
N:Pump speed R:Rack position (mm) (1)Beginning of damper spring operation: DL (2)Excess fuel setting for starting: SXL
----------
DL=6.5+-0.5mm SXL=12.4+-0.1mm
----------

0000000901

Test data 101601-7550
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=22deg+-3deg b=55deg+-5deg

Stop lever angle

Test data 101601-7550
N:Pump normal S:Stop the pump.
----------

----------
a=35.5deg+-5deg b=71deg+-5deg

0000001501 MICRO SWITCH

Adjustment of the micro-switch Adjust the bolt to obtain the following lever position when the micro-switch is ON. (1)Speed N1 (2)Rack position Ra
----------
N1=375r/min Ra=8.6mm
----------




Have questions with 101601-7550?





Group cross 101601-7550 ZEXEL

Isuzu 

 
1156009282 
INJECTION-PUMP ASSEMBLY
6QA1
 
1156009293 
INJECTION-PUMP ASSEMBLY
6QA1
9 400 619 549 
1156009473 
INJECTION-PUMP ASSEMBLY
6QA1
 
1156010193 
INJECTION-PUMP ASSEMBLY
6QA1
 
1156010201 
INJECTION-PUMP ASSEMBLY
6QA2
101601-7550  
 
1156010681 
INJECTION-PUMP ASSEMBLY
6QA2
 
1156010691 
INJECTION-PUMP ASSEMBLY
6QA2
 
1156011152 
INJECTION-PUMP ASSEMBLY
6QA2
 
1156011251 
INJECTION-PUMP ASSEMBLY
6QA2
9 400 614 659 
1156012152 
INJECTION-PUMP ASSEMBLY
6BD1
Back to top