101601-5500 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016015500


101601-5500 INJECTION-PUMP ASSEMBLY
Rating:
79
Buy INJECTION-PUMP ASSEMBLY 101601-5500 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101601-5500 1016015500

Cross reference number

ZEXEL 101601-5500 1016015500


Zexel num
Bosch num
Firm num
Name
101601-5500 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5720
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.1 3.07 3.13
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.75 60.25
Difference between angles 2
Cyl.1-2
deg.   120 119.75 120.25
Difference between angles 3
Cal 1-6
deg.   180 179.75 180.25
Difference between angles 4
Cal 1-3
deg.   240 239.75 240.25
Difference between angles 5
Cal 1-5
deg.   300 299.75 300.25
Injection quantity adjustment
Adjusting point   -
Rack position   9.3
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   61.9 59.9 63.9
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   8.4+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   9 7.5 10.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(9.3)
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   61.9 60.9 62.9
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   R1+0.1
Pump speed r/min   1300 1300 1300
Average injection quantity mm3/st.   66.3 64.3 68.3
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   C
Rack position   R1-0.5
Pump speed r/min   650 650 650
Average injection quantity mm3/st.   40.5 38.5 42.5
Fixing the lever   *
Injection quantity adjustment_06
Adjusting point   E
Rack position   R1-0.1
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   29.7 27.7 31.7
Fixing the lever   *
Injection quantity adjustment_07
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   99 99 109
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   1050--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1000
Advance angle deg.   0.3
Timer adjustment_03
Pump speed r/min   1500-50
Advance angle deg.   3.5 3 4
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101601-5500
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=D84
----------

Speed control lever angle

Test data 101601-5500
F:Full speed I:Idle (1)- (2)Stopper bolt setting
----------

----------
a=(31deg)+-3deg b=34deg+-5deg

Stop lever angle

Test data 101601-5500
N:Pump normal S:Stop the pump.
----------

----------
a=40deg+-5deg b=40deg+-5deg

Timing setting

Test data 101601-5500
(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(70deg)




Have questions with 101601-5500?





Group cross 101601-5500 ZEXEL

101601-5500  
 
 
INJECTION-PUMP ASSEMBLY

Hino 

 
220006240A 
INJECTION-PUMP ASSEMBLY
W06E
 
220006310A 
INJECTION-PUMP ASSEMBLY
H07D-A
 
220006310B 
INJECTION-PUMP ASSEMBLY
H07D-A
 
220006320A 
INJECTION-PUMP ASSEMBLY
H07D-A
 
220006320B 
INJECTION-PUMP ASSEMBLY
H07D-A
 
220006321A 
INJECTION-PUMP ASSEMBLY
H07D-A
 
220006330A 
INJECTION-PUMP ASSEMBLY
H07D-A
 
220006330B 
INJECTION-PUMP ASSEMBLY
H07D-A
 
220006340B 
INJECTION-PUMP ASSEMBLY
H07D-A
9 400 614 617 
220006360A 
INJECTION-PUMP ASSEMBLY
H07C-E
9 400 614 618 
220006370A 
INJECTION-PUMP ASSEMBLY
H07C-E
9 400 614 619 
220203420A 
INJECTION-PUMP ASSEMBLY
W06D
 
 
INJECTION-PUMP ASSEMBLY

Hino 

9 400 614 620 
220006380A 
INJECTION-PUMP ASSEMBLY
W06E
 
 
INJECTION-PUMP ASSEMBLY

Hino 

9 400 614 621 
220006390A 
INJECTION-PUMP ASSEMBLY
W06E
Back to top