101601-5154 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016015154 220004992a

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101601-5154 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101601-5154 1016015154

HINO 220004992A 220004992a

Service parts 101601-5154 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-9931

3. GOVERNOR 105921-1612

4. SUPPLY PUMP 105220-5140

5. AUTOM. ADVANCE MECHANIS 105676-0281

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105110-4350

11. Nozzle and Holder 236001730A

12. Open Pre:MPa(Kqf/cm2) 21.6(220)

13. NOZZLE-HOLDER 105041-5070

14. NOZZLE 105015-6760

15. NOZZLE SET

Include in #1:

101601-5154 as INJECTION-PUMP ASSEMBLY

106682-4720 as _

Cross reference number

ZEXEL 101601-5154 1016015154

HINO 220004992A 220004992a

Zexel num

Bosch num

Firm num

Name

101601-5154

220004992A HINO

INJECTION-PUMP ASSEMBLY
W06E * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-5720

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.1 3.07 3.13

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.75 60.25

Difference between angles 2
Cyl.1-2 deg. 120 119.75 120.25

Difference between angles 3
Cal 1-6 deg. 180 179.75 180.25

Difference between angles 4
Cal 1-3 deg. 240 239.75 240.25

Difference between angles 5
Cal 1-5 deg. 300 299.75 300.25

Injection quantity adjustment

Adjusting point -

Rack position 8.9

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 47.4 45.4 49.4

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 8+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 6.8 5.3 8.3

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(8.9)

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 47.4 46.4 48.4

Basic *

Fixing the lever *

Injection quantity adjustment_04

Adjusting point B

Rack position R1+0.15

Pump speed r/min 1500 1500 1500

Average injection quantity mm3/st. 56.3 52.3 60.3

Fixing the lever *

Injection quantity adjustment_05

Adjusting point C

Rack position R1-0.15

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 36.7 32.7 40.7

Fixing the lever *

Injection quantity adjustment_06

Adjusting point D

Rack position (R1+0.1)

Pump speed r/min 1200 1200 1200

Average injection quantity mm3/st. 52.2 48.2 56.2

Fixing the lever *

Injection quantity adjustment_07

Adjusting point E

Rack position R1+0.3

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 29.2 25.2 33.2

Fixing the lever *

Injection quantity adjustment_08

Adjusting point I

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 99 99 109

Fixing the lever *

Rack limit *

Timer adjustment

Pump speed r/min 1050--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1000

Advance angle deg. 0.3

Timer adjustment_03

Pump speed r/min 1500

Advance angle deg. 3.5 3.2 3.8

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT
----------
T1=B95
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt set position 'H'
----------

----------
a=32deg+-3deg b=34deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=40deg+-5deg b=40deg+-5deg

0000001501 TAMPER PROOF

1. Method for setting tamperproof proofing (1)After governor adjustment (torque cam phase adjustment), move the load lever to increase the full rack position to Ra. (2)At pump speed N1, push in the screw (A) until the rack position is Rb. (3)Temporarily caulk using the tip of a screwdriver (4)Confirm that the rack at that time is at Rc. (5)Lock using setscrew (B). (Tightening torque = T) (6)Next, coat (C) with adhesive and then pressfit. (7)Then, readjust the full rack position using the load lever.
----------
N1=1500r/min Ra=(0.4)mm Rb=R1(8.9)+0.4mm Rc=R1(8.9)+0.4mm
----------
T=3.4~4.9N-m(0.35~0.5Kgf-m)

Timing setting

(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(70deg)

Have questions with 101601-5154?

Group cross 101601-5154 ZEXEL

Hino

101601-5150

101601-5154

220004990A

INJECTION-PUMP ASSEMBLY
W06E

101601-5151

101601-5154

INJECTION-PUMP ASSEMBLY
W06E

101601-5152

101601-5154

220004991A

INJECTION-PUMP ASSEMBLY
W06E

101601-5153

INJECTION-PUMP ASSEMBLY

Hino

101601-5154

220004992A

INJECTION-PUMP ASSEMBLY
W06E