Fuel injectors
  1. Home
  2. injection
  3. #1016014070

101601-4070 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016014070 5156004412


101601-4070 INJECTION-PUMP ASSEMBLY
Rating:
25
Buy INJECTION-PUMP ASSEMBLY 101601-4070 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101601-4070 1016014070
ISUZU 5156004412 5156004412

Cross reference number

ZEXEL 101601-4070 1016014070
ISUZU 5156004412 5156004412


Zexel num
Bosch num
Firm num
Name
101601-4070 
 
5156004412  ISUZU
INJECTION-PUMP ASSEMBLY
6BB1 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   2.4 2.35 2.45
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11
Pump speed r/min   1650 1650 1650
Average injection quantity mm3/st.   53.6 51.2 56
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   11
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   57 55.5 58.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   11
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   52 49.6 54.4
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   9.7+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   6 4.7 7.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Injection quantity adjustment_05
Adjusting point   E
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   57 57
Fixing the lever   *
Remarks
After startup boost setting  

Test data Ex:

Governor adjustment

Test data 101601-4070
N:Pump speed R:Rack position (mm) (1)Excess fuel setting for starting: SXL
----------
SXL=11+0.2mm
----------

Speed control lever angle

Test data 101601-4070
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=43deg+-5deg b=41.5deg+-3deg




Have questions with 101601-4070?





Group cross 101601-4070 ZEXEL

Isuzu 

101601-4000  
 
1156001391 

D920
101601-4010  
 
1156002741 
INJECTION-PUMP ASSEMBLY
D920
101601-4020  

101601-4440 
 
5156003706 
INJECTION-PUMP ASSEMBLY
6BB1
101601-4030  
 
5156003714 
INJECTION-PUMP ASSEMBLY
6BB1
101601-4040  

101601-4041 
 
5156003724 
INJECTION-PUMP ASSEMBLY
6BB1
101601-4041  

101601-8770 
 
5156003726 
INJECTION-PUMP ASSEMBLY
6BB1
101601-4050  
 
1156000593 
INJECTION-PUMP ASSEMBLY
D920
101601-4060  
 
1156000604 
INJECTION-PUMP ASSEMBLY
D920
101601-4070  
 
5156004412 
INJECTION-PUMP ASSEMBLY
6BB1
101601-4080  
 
5156004432 
INJECTION-PUMP ASSEMBLY
6BB1
101601-4090  

101601-4290 
 
5156004981 

Back to top