Buy 101601-3470 ZEXEL 9 400 613 112 BOSCH INJECTION-PUMP ASSEMBLY 9400613112 1016013470 6138721982


101601-3470 INJECTION-PUMP ASSEMBLY
Rating:
24
Buy INJECTION-PUMP ASSEMBLY 101601-3470 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 613 112 9400613112
ZEXEL 101601-3470 1016013470
KOMATSU 6138721982 6138721982

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
$2,710.06
 

13 Aug 2020
43.0[19.35] Pounds
-: -
Fuel Pump for Komatsu S6D110-1, Remanufactured 9400610305 9-400-610-305 9 400 610 305 6138721150
Core Policy: Price Includes Refundable Core Charge. See Core Charge Details in Description Below. || Fuel Pump All wearable and damaged parts are replaced with new components. || Komatsu S6D110-1 Diesel OEM Cross Reference #'s 1016013470 1016013151 101601-3470 101601-3151 || Every pump component is thoroughly inspected and tested to ensure proper performance and reliability || Komatsu Diesel 101601 3470 101601 3151

Service parts 101601-3470 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-2920
3. GOVERNOR 105411-0941
4. SUPPLY PUMP 105210-4690
5. AUTOM. ADVANCE MECHANIS 105614-3070
6. COUPLING PLATE 105662-0810
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-6180
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 24.5(250)
13. NOZZLE-HOLDER 105031-4480
14. NOZZLE 105015-5810
15. NOZZLE SET

Include in #1:

101601-3470 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 613 112 9400613112
ZEXEL 101601-3470 1016013470
KOMATSU 6138721982 6138721982


Zexel num
Bosch num
Firm num
Name
101601-3470 
9 400 613 112 
6138721982  KOMATSU
INJECTION-PUMP ASSEMBLY
S6D110 K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4 3.95 4.05
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   77 76 78
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Boost pressure kPa   40 40
Boost pressure mmHg   300 300
Injection quantity adjustment_02
Adjusting point   B
Rack position   8+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   12.3 11.1 13.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Boost compensator adjustment
Pump speed r/min   650 650 650
Rack position   11.1
Boost pressure kPa   13.3 9.3 17.3
Boost pressure mmHg   100 70 130
Boost compensator adjustment_02
Pump speed r/min   650 650 650
Rack position   11.6
Boost pressure kPa   26.7 26.7 26.7
Boost pressure mmHg   200 200 200
Timer adjustment
Pump speed r/min   750--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   700
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   900
Advance angle deg.   1.4 0.9 1.9
Timer adjustment_04
Pump speed r/min   1100
Advance angle deg.   2.8 2.3 3.3
Timer adjustment_05
Pump speed r/min   -
Advance angle deg.   5 4.5 5.5
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101601-3470
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Boost compensator stroke (3)Rack difference between N = N1 and N = N2 (4)Rack difference between N = N3 and N = N4
----------
K=20 N1=1100r/min N2=750r/min N3=1100r/min N4=400r/min
----------

Speed control lever angle

Test data 101601-3470
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(13deg)+-5deg b=(24deg)+-5deg

Stop lever angle

Test data 101601-3470
N:Pump normal S:Stop the pump. (1)At shipping (2)Set the stopper bolt at speed = aa and rack position = bb.
----------
aa=0r/min bb=1-0.2mm
----------
a=21deg+-5deg b=55deg+-5deg

Timing setting

Test data 101601-3470
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(0deg)




Have questions with 101601-3470?





Group cross 101601-3470 ZEXEL

Komatsu 

9 400 614 582 
6138721350 
INJECTION-PUMP ASSEMBLY
SA6D110
9 400 614 583 
6138721360 
INJECTION-PUMP ASSEMBLY
SA6D110
 
6138721960 
INJECTION-PUMP ASSEMBLY
SA6D110
 
 
INJECTION-PUMP ASSEMBLY
SA6D110
9 400 613 367 
6138721321 
INJECTION-PUMP ASSEMBLY
SA6D110
 
 
INJECTION-PUMP ASSEMBLY
SA6D110
9 400 614 584 
6138721111 
INJECTION-PUMP ASSEMBLY
SA6D110
 
 
INJECTION-PUMP ASSEMBLY
SA6D110
9 400 610 200 
6138721311 
INJECTION-PUMP ASSEMBLY
SA6D110
9 400 614 585 
6138721250 
INJECTION-PUMP ASSEMBLY
S6D110
101601-3470  
9 400 613 112 
6138721982 
INJECTION-PUMP ASSEMBLY
S6D110
 
6138721251 
INJECTION-PUMP ASSEMBLY
S6D110
 
6138721112 
INJECTION-PUMP ASSEMBLY
SA6D110
Back to top