101495-3411 ZEXEL 9 400 611 424 BOSCH INJECTION-PUMP ASSEMBLY 9400611424 1014953411


101495-3411 INJECTION-PUMP ASSEMBLY
Rating:
64
Buy INJECTION-PUMP ASSEMBLY 101495-3411 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 424 9400611424
ZEXEL 101495-3411 1014953411

Service parts 101495-3411 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101049-8800
3. GOVERNOR 105400-8870
4. SUPPLY PUMP 105220-5960
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-6700
11. Nozzle and Holder 6204-11-3100
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105048-3300
14. NOZZLE 105017-2670
15. NOZZLE SET

Include in #1:

101495-3411 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 424 9400611424
ZEXEL 101495-3411 1014953411


Zexel num
Bosch num
Firm num
Name
101495-3411 
101495-3412 
9 400 611 424 
   
INJECTION-PUMP ASSEMBLY
* K 14BC PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-2-4-3
Pre-stroke mm   3.2 3.15 3.25
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cal 1-3
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.2
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   56 55 57
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.7+-0.5
Pump speed r/min   565 565 565
Average injection quantity mm3/st.   8 7 9
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   60 55 65
Fixing the lever   *
Rack limit   *

Test data Ex:

Governor adjustment

Test data 101495-3411
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Rack difference between N = N1 and N = N2 (5)Set idle sub-spring (6)Main spring setting
----------
K=15 N1=1050r/min N2=750r/min
----------

Speed control lever angle

Test data 101495-3411
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt setting
----------
aa=74mm
----------
a=6deg+-5deg b=24deg+-5deg

Stop lever angle

Test data 101495-3411
N:Pump normal S:Stop the pump. (1)Rack position = aa, speed = bb (stamp at delivery) (2)No return spring
----------
aa=1-0.5mm bb=0r/min
----------
a=27.5deg+-5deg b=(55deg)

Timing setting

Test data 101495-3411
(1)Pump vertical direction (2)Position of key groove at No 1 cylinder's beginning of injection (3)Stamp aligning marks on the pump housing flange. (4)B.T.D.C.: aa (5)-
----------
aa=12deg
----------
a=58deg+-3deg b=2deg+-30min




Have questions with 101495-3411?





Group cross 101495-3411 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
101495-3411  

101495-3412 
9 400 611 424 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
4D95LE
9 400 612 161 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 612 940 
6204731340 
INJECTION-PUMP ASSEMBLY
4D95LE
F 01G 09U 1JK 
6204731341 
INJECTION-PUMP ASSEMBLY
4D95LE-2
Back to top