Rating:
Information injection-pump assembly
BOSCH
9 400 610 559
9400610559
ZEXEL
101495-3380
1014953380
KOMATSU
6204731310
6204731310
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$819.72
27 Sep 2023
0.0022[0.00] pounds
CN: 67857Wall
Diesel High Pressure Fuel Pump 101495-3380
REDRAR 1.Stable and durable, no trouble, improve power, smooth operation || 2.Accurate fuel measurement, eliminate oil smell, stable performance, high reliability. || 3.Smooth operation, high temperature resistance, anti-aging, original vehicle specifications. || 4.Accurate oil level meter eliminates odors, reduces wear, and reduces fuel consumption || 5.Stable acceleration and no stall, improve engine performance, stable and durable oil supply, quiet and no heat, to solve the oil circuit failure.
REDRAR 1.Stable and durable, no trouble, improve power, smooth operation || 2.Accurate fuel measurement, eliminate oil smell, stable performance, high reliability. || 3.Smooth operation, high temperature resistance, anti-aging, original vehicle specifications. || 4.Accurate oil level meter eliminates odors, reduces wear, and reduces fuel consumption || 5.Stable acceleration and no stall, improve engine performance, stable and durable oil supply, quiet and no heat, to solve the oil circuit failure.
$1,655.28
12 Mar 2023
0.0022[0.00] Pounds
CN: Pete mall
ORDALI Automobile Fuel Pump Pc60-7 Engine High Pressure Injection Pump 101495-3380 Fuel Pump Assembly kit
ORDALI 1. Stable and durable, eliminate faults. || 2. Precise oil quantity, eliminate odor. || 3. Improve power and smooth operation. || 4. Reduce wear and tear and improve fuel consumption. || 5. Reduce fuel consumption, improve jitter, accelerate smoothly.
ORDALI 1. Stable and durable, eliminate faults. || 2. Precise oil quantity, eliminate odor. || 3. Improve power and smooth operation. || 4. Reduce wear and tear and improve fuel consumption. || 5. Reduce fuel consumption, improve jitter, accelerate smoothly.
Service parts 101495-3380 INJECTION-PUMP ASSEMBLY:
1.
_
5.
AUTOM. ADVANCE MECHANIS
6.
COUPLING PLATE
7.
COUPLING PLATE
8.
_
9.
_
11.
Nozzle and Holder
6202-13-3300
12.
Open Pre:MPa(Kqf/cm2)
22.1{225}
15.
NOZZLE SET
Cross reference number
BOSCH
9 400 610 559
9400610559
ZEXEL
101495-3380
1014953380
KOMATSU
6204731310
6204731310
Zexel num
Bosch num
Firm num
Name
9 400 610 559
6204731310 KOMATSU
INJECTION-PUMP ASSEMBLY
4D95LE * K 14BC INJECTION PUMP ASSY PE4A,5A, PE
4D95LE * K 14BC INJECTION PUMP ASSY PE4A,5A, PE
Calibration Data:
Adjustment conditions
Test oil
1404 Test oil ISO4113 or {SAEJ967d}
1404 Test oil ISO4113 or {SAEJ967d}
Test oil temperature
degC
40
40
45
Nozzle and nozzle holder
105780-8140
Bosch type code
EF8511/9A
Nozzle
105780-0000
Bosch type code
DN12SD12T
Nozzle holder
105780-2080
Bosch type code
EF8511/9
Opening pressure
MPa
17.2
Opening pressure
kgf/cm2
175
Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600
Outer diameter - inner diameter - length (mm) mm 6-2-600
Tester oil delivery pressure
kPa
157
157
157
Tester oil delivery pressure
kgf/cm2
1.6
1.6
1.6
Direction of rotation (viewed from drive side)
Right R
Right R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right R
Right R
Injection order
1-2-4-3
Pre-stroke
mm
3.6
3.55
3.65
Beginning of injection position
Drive side NO.1
Drive side NO.1
Difference between angles 1
Cyl.1-2 deg. 90 89.5 90.5
Cyl.1-2 deg. 90 89.5 90.5
Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5
Cal 1-4 deg. 180 179.5 180.5
Difference between angles 3
Cal 1-3 deg. 270 269.5 270.5
Cal 1-3 deg. 270 269.5 270.5
Injection quantity adjustment
Adjusting point
A
Rack position
11.8
Pump speed
r/min
950
950
950
Average injection quantity
mm3/st.
45
44
46
Max. variation between cylinders
%
0
-2.5
2.5
Basic
*
Fixing the lever
*
Injection quantity adjustment_02
Adjusting point
-
Rack position
10+-0.5
Pump speed
r/min
500
500
500
Average injection quantity
mm3/st.
13
12
14
Max. variation between cylinders
%
0
-15
15
Fixing the rack
*
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
Adjust only variation between cylinders; adjust governor according to governor specifications.
Injection quantity adjustment_03
Adjusting point
D
Rack position
15+0.2
Pump speed
r/min
100
100
100
Average injection quantity
mm3/st.
56
46
66
Fixing the lever
*
Rack limit
*
Test data Ex:
Governor adjustment
N:Pump speed
R:Rack position (mm)
(1)Target notch: K
(2)Tolerance for racks not indicated: +-0.05mm.
(3)RACK LIMIT: RAL
----------
K=10 RAL=15+0.2mm
----------
----------
K=10 RAL=15+0.2mm
----------
Speed control lever angle
F:Full speed
I:Idle
(1)Stopper bolt setting
----------
----------
a=(2deg)+-5deg b=(22deg)+-5deg
----------
----------
a=(2deg)+-5deg b=(22deg)+-5deg
Stop lever angle
N:Pump normal
S:Stop the pump.
(1)Rack position = aa, speed = bb (stamp at delivery)
(2)No return spring
----------
aa=1-0.5mm bb=0r/min
----------
a=27.5deg+-5deg b=(55deg)
----------
aa=1-0.5mm bb=0r/min
----------
a=27.5deg+-5deg b=(55deg)
Timing setting
(1)Pump vertical direction
(2)Position of key groove at No 1 cylinder's beginning of injection
(3)Stamp aligning marks on the pump housing flange.
(4)-
----------
----------
a=59deg36min+-3deg b=0deg24min+-30min
----------
----------
a=59deg36min+-3deg b=0deg24min+-30min