101495-3250 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014953250

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101495-3250 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101495-3250 1014953250

Service parts 101495-3250 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP

101049-8760

3. GOVERNOR 105400-7700

4. SUPPLY PUMP 105220-6130

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-4850

11. Nozzle and Holder 6202-13-3500

12. Open Pre:MPa(Kqf/cm2) 22.1{225}

13. NOZZLE-HOLDER 105048-3300

14. NOZZLE 105017-0840

15. NOZZLE SET

Include in #1:

101492-3430 as _

101495-3250 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101495-3250 1014953250

Zexel num

Bosch num

Firm num

Name

101495-3250

INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-2-4-3

Pre-stroke mm 3.6 3.55 3.65

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cyl.1-2 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cal 1-3 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point A

Rack position 9.8

Pump speed r/min 1225 1225 1225

Average injection quantity mm3/st. 30.5 29.5 31.5

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 10.7+-0. 5

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 33 31 35

Fixing the lever *

Injection quantity adjustment_03

Adjusting point -

Rack position 9.2+-0.5

Pump speed r/min 410 410 410

Average injection quantity mm3/st. 8 7 9

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL (3)Rack difference from N = N1 (4)Rack difference to N = N2
----------
K=8 RAL=15+0.2mm N1=1225r/min N2=1225r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt setting
----------
aa=60mm
----------
a=(5deg)+-5deg b=(27deg)+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=26.5deg+-5deg b=53deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of key groove at No 1 cylinder's beginning of injection (3)Stamp aligning marks on the pump housing flange. (4)-
----------

----------
a=59deg36min+-3deg b=0deg24min+-30min

Have questions with 101495-3250?

Komatsu

101495-3282

9 400 614 523

6204711560

INJECTION-PUMP ASSEMBLY
4D95L

101495-3290

9 400 614 524

6204711290

INJECTION-PUMP ASSEMBLY
4D95L