Fuel injectors
  1. Home
  2. injection
  3. #1014953011

101495-3011 ZEXEL 9 400 614 508 BOSCH INJECTION-PUMP ASSEMBLY 9400614508 1014953011 6204711651


101495-3011 INJECTION-PUMP ASSEMBLY
Rating:
17
Buy INJECTION-PUMP ASSEMBLY 101495-3011 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 508 9400614508
ZEXEL 101495-3011 1014953011
KOMATSU 6204711651 6204711651

Include in #1:

101495-3361 as _

Cross reference number

BOSCH 9 400 614 508 9400614508
ZEXEL 101495-3011 1014953011
KOMATSU 6204711651 6204711651


Zexel num
Bosch num
Firm num
Name
101495-3011 
9 400 614 508 
6204711651  KOMATSU
INJECTION-PUMP ASSEMBLY
4D95L K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-2-4-3
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cyl.1-2 deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 3
Cal 1-3 deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   10
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   40.7 39.7 41.7
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   9.3+-0.5
Pump speed r/min   240 240 240
Average injection quantity mm3/st.   7 6 8
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.  

Test data Ex:

Governor adjustment

Test data 101495-3011
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Rack difference between N = N1 and N = N2
----------
K=17 N1=1500r/min N2=900r/min
----------

Speed control lever angle

Test data 101495-3011
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=43deg+-5deg b=27deg+-5deg

Stop lever angle

Test data 101495-3011
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=26.5deg+-5deg b=53deg+-5deg

Timing setting

Test data 101495-3011
(1)Pump vertical direction (2)Position of key groove at No 1 cylinder's beginning of injection (3)Stamp aligning marks on the pump housing flange. (4)-
----------

----------
a=59deg36min+-3deg b=0deg24min+-30min




Have questions with 101495-3011?





Group cross 101495-3011 ZEXEL

Komatsu 

101495-3000  
 
6204711190 
INJECTION-PUMP ASSEMBLY
4D95L
101495-3010  

101495-3011 
 
6204711650 
INJECTION-PUMP ASSEMBLY
4D95L
101495-3011  
9 400 614 508 
6204711651 
INJECTION-PUMP ASSEMBLY
4D95L
101495-3020  
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

101495-3021  
9 400 614 509 
6204711411 
INJECTION-PUMP ASSEMBLY
4D95L
101495-3030  
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

101495-3031  
9 400 614 510 
6204711442 
INJECTION-PUMP ASSEMBLY
4D95L
101495-3040  
9 400 614 511 
6204711610 
INJECTION-PUMP ASSEMBLY
4D95L
101495-3050  
9 400 614 512 
6204711711 
INJECTION-PUMP ASSEMBLY
4D95L
101495-3060  
9 400 614 513 
6204711722 
INJECTION-PUMP ASSEMBLY
4D95L
101495-3070  
9 400 614 514 
6204711511 
INJECTION-PUMP ASSEMBLY
4D95L
101495-3080  
 
6204711461 
INJECTION-PUMP ASSEMBLY
4D95L
101495-3090  
 
6204711521 
INJECTION-PUMP ASSEMBLY
4D95L
Back to top