101492-9090 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014929090 1671290114


101492-9090 INJECTION-PUMP ASSEMBLY
Rating:
39
Buy INJECTION-PUMP ASSEMBLY 101492-9090 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101492-9090 1014929090
NISSAN-DIESEL 1671290114 1671290114

Service parts 101492-9090 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101049-9210
3. GOVERNOR 105400-3910
4. SUPPLY PUMP 105220-4840
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156636-6320
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-6370
11. Nozzle and Holder 16600T9303
12. Open Pre:MPa(Kqf/cm2) 19.6(200)
13. NOZZLE-HOLDER 105031-4600
14. NOZZLE
15. NOZZLE SET

Include in #1:

101492-9090 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101492-9090 1014929090
NISSAN-DIESEL 1671290114 1671290114


Zexel num
Bosch num
Firm num
Name
101492-9090 
101492-9190 
 
1671290114  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FD33 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-6120
Overflow valve opening pressure kPa   191 157 225
Overflow valve opening pressure kgf/cm2   1.95 1.6 2.3
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.1
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   44.7 43.7 45.7
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   9.5+-0.5
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   10 8 12
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 

Test data Ex:

Governor adjustment

Test data 101492-9090
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Rack difference between N = N1 and N = N2 (3)Idle sub spring setting: L1.
----------
K=8 N1=750r/min N2=400r/min L1=7.9-0.5mm
----------

Speed control lever angle

Test data 101492-9090
F:Full speed I:Idle (1)Set the pump speed at aa. ( At delivery ) (2)Set the pump speed at bb. (3)Stopper bolt setting
----------
aa=900r/min bb=750r/min
----------
a=(4deg)+-5deg b=(22deg)+-5deg c=(6deg)+-5deg

Stop lever angle

Test data 101492-9090
N:Pump normal S:Stop the pump.
----------

----------
a=26.5deg+-5deg b=53deg+-5deg

0000001501 GOV FULL LOAD ADJUSTMENT

Test data 101492-9090
Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)-
----------

----------
a1=A a2=- r1=750r/min r2=- Q1=44.7+-1mm3/st Q2=- c1=+-3.5% c2=- a3=18 a4=15 r3=900r/min r4=750r/min

Timing setting

Test data 101492-9090
(1)Pump vertical direction (2)Position of gear's standard threaded hole (position of gear mark 'N') at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101492-9090?





Group cross 101492-9090 ZEXEL

Nissan-Diesel 

 
 
INJECTION-PUMP ASSEMBLY
FD33
 
1679090201 
INJECTION-PUMP ASSEMBLY
FD33
 
1679090202 
INJECTION-PUMP ASSEMBLY
FD33
9 400 614 467 
1679090207 
INJECTION-PUMP ASSEMBLY
FD33
 
 
INJECTION-PUMP ASSEMBLY
FD33
 
 
INJECTION-PUMP ASSEMBLY
FD33
9 400 614 468 
1679090208 
INJECTION-PUMP ASSEMBLY
FD33
9 400 614 469 
1679090210 
INJECTION-PUMP ASSEMBLY
FD33
101492-9090  

101492-9190 
 
1671290114 
INJECTION-PUMP ASSEMBLY
FD33
Back to top