Fuel injectors
  1. Home
  2. injection
  3. #1014923320

101492-3320 ZEXEL 9 400 610 364 BOSCH INJECTION-PUMP ASSEMBLY 9400610364 1014923320 6114711400


101492-3320 INJECTION-PUMP ASSEMBLY
Rating:
43
Buy INJECTION-PUMP ASSEMBLY 101492-3320 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 364 9400610364
ZEXEL 101492-3320 1014923320
KOMATSU 6114711400 6114711400

Service parts 101492-3320 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101049-0080
3. GOVERNOR 105402-1440
4. SUPPLY PUMP 105210-1841
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105661-0010
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105151-1480
11. Nozzle and Holder 6114-11-3200
12. Open Pre:MPa(Kqf/cm2) 13.7{140}
13. NOZZLE-HOLDER 105081-1110
14. NOZZLE 105000-1660
15. NOZZLE SET

Include in #1:

101492-3320 as INJECTION-PUMP ASSEMBLY
106692-4740 as _

Cross reference number

BOSCH 9 400 610 364 9400610364
ZEXEL 101492-3320 1014923320
KOMATSU 6114711400 6114711400


Zexel num
Bosch num
Firm num
Name
101492-3320 
9 400 610 364 
6114711400  KOMATSU
INJECTION-PUMP ASSEMBLY
4D130 * K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-2-4-3
Pre-stroke mm   2.4 2.35 2.45
Rack position   R=10
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cyl.1-2 deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 3
Cal 1-3 deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.6
Pump speed r/min   950 950 950
Average injection quantity mm3/st.   122 121 123
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   D
Rack position   5.2
Pump speed r/min   315 315 315
Average injection quantity mm3/st.   24 21.6 26.4
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101492-3320
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Supplied with torque spring not set.
----------
K=12
----------

Speed control lever angle

Test data 101492-3320
F:Full speed I:Idle S:Stop
----------

----------
a=47deg+-5deg b=20deg+-5deg c=10deg+-3deg




Have questions with 101492-3320?





Group cross 101492-3320 ZEXEL

Komatsu 

101492-3300  

101492-3361 
 
6130721310 

101492-3310  
9 400 614 433 
6130721412 
INJECTION-PUMP ASSEMBLY
4D105
101492-3320  
9 400 610 364 
6114711400 
INJECTION-PUMP ASSEMBLY
4D130
101492-3330  
 
6130752100 
INJECTION-PUMP ASSEMBLY
4D105
101492-3340  
9 400 614 434 
6130721151 
INJECTION-PUMP ASSEMBLY
4D105
101492-3350  

101492-3370 
 
6130711232 

101492-3361  
 
6130721312 
INJECTION-PUMP ASSEMBLY
4D105
101492-3370  
 
6130711233 

4D105
101492-3380  
 
6130721191 
INJECTION-PUMP ASSEMBLY
4D105
101492-3390  
 
6130721680 
INJECTION-PUMP ASSEMBLY
4D105
Back to top