101492-1130 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014921130


101492-1130 INJECTION-PUMP ASSEMBLY
Rating:
8
Buy INJECTION-PUMP ASSEMBLY 101492-1130 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101492-1130 1014921130

Cross reference number

ZEXEL 101492-1130 1014921130


Zexel num
Bosch num
Firm num
Name
101492-1130 
101492-1131 
 
  MITSUBISHI
INJECTION-PUMP ASSEMBLY
4D31T *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.2 3.15 3.25
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.8
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   61.5 60.5 62.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   8.2+-0.5
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   7.5 6.2 8.8
Max. variation between cylinders %   0 -14 14
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101492-1130
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL (3)Idle sub spring setting: L1. (4)At shipping (5)Rack difference between N = N1 and N = N2
----------
K=6 RAL=13.3+-0.2mm L1=6.9-0.5mm N1=750r/min N2=280r/min
----------

Speed control lever angle

Test data 101492-1130
F:Full speed I:Idle (1)At shipping (2)Pump speed = aa (3)Pump speed = bb (4)Stopper bolt setting
----------
aa=900r/min bb=750r/min
----------
a=(2deg) b=(1deg)+-5deg c=(6deg)+-5deg d=(22deg)+-5deg

Stop lever angle

Test data 101492-1130
N:Pump normal S:Stop the pump. (1)At shipping
----------

----------
a=38deg+-5deg b=53deg+-5deg

Timing setting

Test data 101492-1130
(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(130deg)




Have questions with 101492-1130?





Group cross 101492-1130 ZEXEL

Mitsubishi 

 
ME017997 
INJECTION-PUMP ASSEMBLY
4D31PT
F 019 Z10 583 
ME080000 
INJECTION-PUMP ASSEMBLY
4D31T
 
 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 426 
ME080224 
INJECTION-PUMP ASSEMBLY
4D31T
101492-1130  

101492-1131 
 
 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 427 
ME080227 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 428 
ME080513 
INJECTION-PUMP ASSEMBLY
4D31T
 
ME080514 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 429 
ME080591 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 430 
ME080592 
INJECTION-PUMP ASSEMBLY
4D31T
F 01G 09U 02F 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 614 431 
ME080594 
INJECTION-PUMP ASSEMBLY
4D31T
Back to top