101492-1080 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014921080 me018041


101492-1080 INJECTION-PUMP ASSEMBLY
Rating:
22
Buy INJECTION-PUMP ASSEMBLY 101492-1080 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101492-1080 1014921080
MITSUBISHI ME018041 me018041

Service parts 101492-1080 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101049-9031
3. GOVERNOR 105402-1990
4. SUPPLY PUMP 105220-5180
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156636-5320
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-4050
11. Nozzle and Holder ME019368
12. Open Pre:MPa(Kqf/cm2) 17.7{180}
13. NOZZLE-HOLDER 105048-3010
14. NOZZLE 105017-0040
15. NOZZLE SET

Include in #1:

101492-1080 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101492-1080 1014921080
MITSUBISHI ME018041 me018041


Zexel num
Bosch num
Firm num
Name
101492-1080 
 
ME018041  MITSUBISHI
INJECTION-PUMP ASSEMBLY
4D31T * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.2 3.15 3.25
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.8
Pump speed r/min   975 975 975
Average injection quantity mm3/st.   66.4 65.4 67.4
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   8.2+-0.5
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   7.5 6.2 8.8
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   C
Rack position   11.6+-0. 5
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   60.5 60.5 65.5
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   7.6+-0.5
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   8 7 9
Max. variation between cylinders %   0 -15 15
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101492-1080
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT (3)Torque spring does not operate. (4)Idle sub spring setting: L1. (5)Setting at shipping
----------
K=13 L1=9.2+-0.1mm
----------

Speed control lever angle

Test data 101492-1080
F:Full speed I:Idle (1)At shipping (2)Stopper bolt setting
----------

----------
a=18deg+-5deg b=5deg+-5deg c=(12deg)

Stop lever angle

Test data 101492-1080
N:Pump normal S:Stop the pump.
----------

----------
a=27deg+-5deg b=53deg+-5deg

Timing setting

Test data 101492-1080
(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(130deg)




Have questions with 101492-1080?





Group cross 101492-1080 ZEXEL

Mitsubishi 

 
ME019330 
INJECTION-PUMP ASSEMBLY
4D31T
 
 
INJECTION-PUMP ASSEMBLY
4D31T
 
ME019335 
INJECTION-PUMP ASSEMBLY
4D31T
 
 
INJECTION-PUMP ASSEMBLY
4D31T
 
ME019337 
INJECTION-PUMP ASSEMBLY
4D31T
 
 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 421 
ME017757 
INJECTION-PUMP ASSEMBLY
4D31T
 
 
INJECTION-PUMP ASSEMBLY
4D31T
 
ME017758 
INJECTION-PUMP ASSEMBLY
4D31T
 
 
INJECTION-PUMP ASSEMBLY
4D31PT
9 400 614 422 
ME017813 
INJECTION-PUMP ASSEMBLY
4D31PT
 
 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 423 
ME017863 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 424 
ME018037 
INJECTION-PUMP ASSEMBLY
4D31CT
101492-1080  
 
ME018041 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 425 
ME017996 
INJECTION-PUMP ASSEMBLY
4D31PT
Back to top