101491-9810 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014919810


101491-9810 INJECTION-PUMP ASSEMBLY
Rating:
59
Buy INJECTION-PUMP ASSEMBLY 101491-9810 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101491-9810 1014919810

Service parts 101491-9810 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101049-9531
3. GOVERNOR 105921-5410
4. SUPPLY PUMP 105220-5252
5. AUTOM. ADVANCE MECHANIS 105670-0080
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-4341
11. Nozzle and Holder SL70 13 H50A
12. Open Pre:MPa(Kqf/cm2) 16.7{170}
13. NOZZLE-HOLDER 105048-3121
14. NOZZLE 105017-0280
15. NOZZLE SET

Include in #1:

101491-9810 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101491-9810 1014919810


Zexel num
Bosch num
Firm num
Name
101491-9810 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   -
Rack position   10.9
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   49.4 48.9 49.9
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   9.6+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   9 7 11
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(10.9)
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   49.4 48.9 49.9
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1(10.9)
Pump speed r/min   1700 1700 1700
Average injection quantity mm3/st.   55.2 51.2 59.2
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   C
Rack position   R1+0.33
Pump speed r/min   625 625 625
Average injection quantity mm3/st.   39.8 35.8 43.8
Fixing the lever   *
Injection quantity adjustment_06
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   91 81 96
Fixing the lever   *
Rack limit   *
Injection quantity adjustment_07
Adjusting point   H
Rack position   9.3+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   7 6.5 7.5
Fixing the lever   *
Timer adjustment
Pump speed r/min   1330+-25
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1700
Advance angle deg.   3.5 3.2 3.8
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101491-9810
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=G05
----------

Speed control lever angle

Test data 101491-9810
F:Full speed I:Idle (1)Stopper bolt set position 'H' (2)Rack position = aa, speed = bb
----------
aa=(9.3)mm bb=325r/min
----------
a=20deg+-5deg b=(41deg)+-3deg

Stop lever angle

Test data 101491-9810
N:Pump normal S:Engine stop (1)Use the hole at R = aa (2)Set the stop adjuster screw
----------
aa=39mm
----------
a=14deg+-5deg b=(30deg)+-5deg

0000001501 LEVER

Test data 101491-9810
CL:Center line of camshaft ST:Stop adjuster screw f1:Direction for pulling the speed lever f2:Direction for pulling the stop lever 1. Stop lever adjustment outline (1)After completing all adjustments, confirm that the lever angle is within the specifications in the normal position. (2)Set the speed lever in the full speed position. (3)At pump speed Na, position the rack at non-injection position Ra. (4)Set the stop adjusting screw to fix the speed lever in the idling position. (5)Confirm that there is no injection at pump speed Nb.
----------
Na=1860r/min Nb=325r/min Ra=4.6+-0.3mm
----------

Timing setting

Test data 101491-9810
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=13deg
----------
a=(130deg)




Have questions with 101491-9810?





Group cross 101491-9810 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
167000T010 
INJECTION-PUMP ASSEMBLY
FD4
101491-9810  
 
 
INJECTION-PUMP ASSEMBLY

Mazda 

9 400 614 351 
SLD113800 
INJECTION-PUMP ASSEMBLY
SL
 
 
INJECTION-PUMP ASSEMBLY

Mazda 

F 019 Z10 580 
SLD313800 
INJECTION-PUMP ASSEMBLY
SL
 
 
INJECTION-PUMP ASSEMBLY

Mazda 

F 019 Z10 581 
SLD513800 
INJECTION-PUMP ASSEMBLY
SL

Nissan-Diesel 

 
167000T300 
INJECTION-PUMP ASSEMBLY
FD3
 
 
INJECTION-PUMP ASSEMBLY

Mazda 

F 019 Z10 582 
SLT513800A 
INJECTION-PUMP ASSEMBLY
SL
9 400 614 352 
SLT513800C 
INJECTION-PUMP ASSEMBLY
SL

Nissan-Diesel 

F 019 Z20 452 
1670001T11 
INJECTION-PUMP ASSEMBLY
FD35
9 400 614 353 
1671290167 
INJECTION-PUMP ASSEMBLY
FD33
9 400 614 354 
1670001T12 
INJECTION-PUMP ASSEMBLY
FD35
9 400 614 355 
167000T001 
INJECTION-PUMP ASSEMBLY
FD4
Back to top