101491-9580 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014919580

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101491-9580 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101491-9580 1014919580

Service parts 101491-9580 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101049-9410

3. GOVERNOR 105921-3330

4. SUPPLY PUMP

5. AUTOM. ADVANCE MECHANIS 105670-0080

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-4091

11. Nozzle and Holder SL0113640A

12. Open Pre:MPa(Kqf/cm2) 16.7(170)

13. NOZZLE-HOLDER 105048-3121

14. NOZZLE 105017-2070

15. NOZZLE SET

Include in #1:

101491-9580 as INJECTION-PUMP ASSEMBLY

106692-4403 as _

Cross reference number

ZEXEL 101491-9580 1014919580

Zexel num

Bosch num

Firm num

Name

101491-9580

INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 3.4 3.35 3.45

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point -

Rack position 11.21+-0 .02

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 56.8 56.3 57.3

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 9.3+-0.5

Pump speed r/min 325 325 325

Average injection quantity mm3/st. 9 7 11

Max. variation between cylinders % 0 -14 14

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position 11.21+-0 .5

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 56.8 56.3 57.3

Basic *

Fixing the lever *

Injection quantity adjustment_04

Adjusting point B

Rack position 11.48+-0 .5

Pump speed r/min 1700 1700 1700

Average injection quantity mm3/st. 68.9 66.9 70.9

Fixing the lever *

Injection quantity adjustment_05

Adjusting point C

Rack position 11.32+-0 .5

Pump speed r/min 625 625 625

Average injection quantity mm3/st. 42 40 44

Fixing the lever *

Injection quantity adjustment_06

Adjusting point I

Rack position 16.3+-0. 5

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 91 81 96

Fixing the lever *

Rack limit *

Timer adjustment

Pump speed r/min 1350+-25

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1700

Advance angle deg. 3.5 3.2 3.8

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: R1, speed N1 (3)RACK LIMIT
----------
T1=C83 R1=+-0.02mm N1=+-3r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=20deg+-5deg b=41deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Normal (2)Stop (3)Stopper bolt setting (4)Set the speed to aa using the idle lever and then confirm non-injection.
----------
aa=325r/min
----------
a=(15deg)+-5deg b=(13.5deg) c=23deg+-5deg d=40deg+-5deg

0000001501 GOV RACK POSITION CONFIRM

Confirm the governor adjustment rack position. Standard point A Set the torque cam B. (C) Confirmation (D) Remarks (N): Speed of the pump (R) Rack position (mm)
----------

----------
Na=1000r/min Nb=625r/min Nc=1800r/min Nd=1700r/min Ne=1400r/min Nf=450r/min Ra=11.21+-0.02mm Rb=11.32+-0.02mm Rc=11.27+-0.1mm Rd=11.48+-0.05mm Re=11.39+-0.05mm Rf=11.46+-0.05mm

0000001601 LEVER

f1:Direction for pulling the speed lever f2:Direction for pulling the stop lever Stop lever's normal position setting method 1. (1) Push in the set bolt (A) until the rack starts to move. (2)Return the bolt N1 turns from that position and set. 2. Rack with limiter (1)Return the bolt N1 turns from the rack limit position and set.
----------
N1=1.5
----------

0000001701 ACS

(A) Set screw (B) Push rod 1 (C) Push rod 2 (D) Cover 1. Aneroid compensator unit adjustment (1)Select the push rod 2 to obtain L2. (2)Screw in (A) to obtain L1. 2. Adjustment when mounting the governor. (1)Set the speed of the pump to N1 r/min and fix the control lever at the full set position. (2)Screw in the aneroid compensator to obtain the performance shown in the graph above. (3)As there is hysterisis, measure when the absolute pressure drops. (4)Hysterisis must not exceed rack position = h1.
----------
N1=1000r/min L1=(1.5)mm L2=11+-0.5mm h1=-
----------
Ra=(11.21)mm Rb=(10.8)mm Pa=88.6+-2.7kPa(665+-20mmHg) Pb=79.4+-0.7kPa(596+-5mmHg) Q1=56.8+-0.5cm3/1000st Q2=48.8+-1cm3/1000st