101491-9355 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014919355 sl7313800c


101491-9355 INJECTION-PUMP ASSEMBLY
Rating:
46
Buy INJECTION-PUMP ASSEMBLY 101491-9355 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101491-9355 1014919355
MAZDA SL7313800C sl7313800c

Service parts 101491-9355 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101049-9310
3. GOVERNOR 105921-2820
4. SUPPLY PUMP 105220-5252
5. AUTOM. ADVANCE MECHANIS 105670-0290
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-4341
11. Nozzle and Holder SL70 13 H50A
12. Open Pre:MPa(Kqf/cm2) 16.7{170}
13. NOZZLE-HOLDER 105048-3121
14. NOZZLE 105017-0280
15. NOZZLE SET

Include in #1:

101491-9355 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101491-9355 1014919355
MAZDA SL7313800C sl7313800c


Zexel num
Bosch num
Firm num
Name
101491-9355 
101491-9356 
 
SL7313800C  MAZDA
INJECTION-PUMP ASSEMBLY
P627SL * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-3420
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   -
Rack position   10.8
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   50.1 49.6 51.1
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H'
Rack position   9.5+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   9 7 11
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(10.8)
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   50.1 49.6 51.1
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1-0.05
Pump speed r/min   625 625 625
Average injection quantity mm3/st.   36.5 36.5 38.5
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   C
Rack position   R1+0.28
Pump speed r/min   1600 1600 1600
Average injection quantity mm3/st.   59.1 57.1 62.1
Fixing the lever   *
Injection quantity adjustment_06
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   91 81 96
Fixing the lever   *
Rack limit   *
Injection quantity adjustment_07
Adjusting point   H
Rack position   9.3+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   7 6.5 7.5
Fixing the lever   *
Timer adjustment
Pump speed r/min   1350+-25
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1600
Advance angle deg.   3.1 2.8 3.4
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   3.3 3 3.6
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101491-9355
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT
----------
T1=D09
----------

Speed control lever angle

Test data 101491-9355
F:Full speed I:Idle (1)Stopper bolt set position 'H' (2)Rack position = aa, speed = bb
----------
aa=(9.3)mm bb=325r/min
----------
a=20deg+-5deg b=(41deg)+-3deg

Stop lever angle

Test data 101491-9355
N:Pump normal S:Stop the pump. (1)Normal (2)Stop (3)Stopper bolt setting (4)Set the speed to aa using the idle lever and then confirm non-injection.
----------
aa=325r/min
----------
a=(15deg)+-5deg b=(13.5deg) c=23deg+-5deg d=40deg+-5deg

0000001501 LEVER

Test data 101491-9355
f1:Direction for pulling the speed lever f2:Direction for pulling the stop lever Stop lever's normal position setting method 1. (1) Push in the set bolt (A) until the rack starts to move. (2)Return the bolt N1 turns from that position and set. 2. Rack with limiter (1)Return the bolt N1 turns from the rack limit position and set.
----------
N1=1.5
----------

Timing setting

Test data 101491-9355
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg-2deg
----------
a=(130deg)




Have questions with 101491-9355?





Group cross 101491-9355 ZEXEL

Mazda 

 
SL7113800 
INJECTION-PUMP ASSEMBLY
P627SL
 
 
INJECTION-PUMP ASSEMBLY
P627
 
 
INJECTION-PUMP ASSEMBLY

Mazda 

 
SL7313800B 
INJECTION-PUMP ASSEMBLY
P627SL
101491-9355  

101491-9356 
 
SL7313800C 
INJECTION-PUMP ASSEMBLY
P627SL
 
 
INJECTION-PUMP ASSEMBLY

Mazda 

9 400 614 339 
SL7313800E 
INJECTION-PUMP ASSEMBLY
P627SL
Back to top