101491-9353 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014919353

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101491-9353 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101491-9353 1014919353

Service parts 101491-9353 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101049-9310

3. GOVERNOR 105921-2141

4. SUPPLY PUMP

5. AUTOM. ADVANCE MECHANIS 105670-0240

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-4341

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 16.7(170)

13. NOZZLE-HOLDER 105048-3121

14. NOZZLE 105017-0280

15. NOZZLE SET

Include in #1:

101491-9353 as INJECTION-PUMP ASSEMBLY

101601-3130 as _

Cross reference number

ZEXEL 101491-9353 1014919353

Zexel num

Bosch num

Firm num

Name

101491-9353

INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-3420

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 3.4 3.35 3.45

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point -

Rack position 10.92

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 51.8 51.3 52.3

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H'

Rack position 9.5+-0.5

Pump speed r/min 325 325 325

Average injection quantity mm3/st. 9 7 11

Max. variation between cylinders % 0 -14 14

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(10.92 )

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 51.8 51.3 52.3

Basic *

Fixing the lever *

Injection quantity adjustment_04

Adjusting point B

Rack position (R1+0.01 )

Pump speed r/min 625 625 625

Average injection quantity mm3/st. 38.7 34.7 42.7

Fixing the lever *

Injection quantity adjustment_05

Adjusting point C

Rack position R1+0.15

Pump speed r/min 1600 1600 1600

Average injection quantity mm3/st. 61.2 57.2 65.2

Fixing the lever *

Injection quantity adjustment_06

Adjusting point I

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 91 81 96

Fixing the lever *

Rack limit *

Timer adjustment

Pump speed r/min 1350+-25

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1600

Advance angle deg. 2.6 2.3 2.9

Timer adjustment_03

Pump speed r/min -

Advance angle deg. 2.8 2.8 2.8

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT
----------
T1=C61
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt set position 'H' (rack position = aa, speed = bb)
----------
aa=9.3mm bb=325r/min
----------
a=20deg+-5deg b=(38deg)+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Normal (2)Stop (3)Stopper bolt setting (4)Set the speed to aa using the idle lever and then confirm non-injection.
----------
aa=325r/min
----------
a=(15deg)+-5deg b=(13.5deg) c=23deg+-5deg d=40deg+-5deg

0000001501 LEVER

f1:Direction for pulling the speed lever f2:Direction for pulling the stop lever Stop lever's normal position setting method 1. (1) Push in the set bolt (A) until the rack starts to move. (2)Return the bolt N1 turns from that position and set. 2. Rack with limiter (1)Return the bolt N1 turns from the rack limit position and set.
----------
N1=1.5
----------

Timing setting

(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg-2deg
----------
a=(130deg)