101491-1330 ZEXEL 9 400 614 322 BOSCH INJECTION-PUMP ASSEMBLY 9400614322 1014911330 me080515

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101491-1330 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 322 9400614322

ZEXEL 101491-1330 1014911330

MITSUBISHI ME080515 me080515

Service parts 101491-1330 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101049-9031

3. GOVERNOR 105402-2400

4. SUPPLY PUMP 105220-5180

5. AUTOM. ADVANCE MECHANIS 105676-0260

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-5131

11. Nozzle and Holder ME080501

12. Open Pre:MPa(Kqf/cm2) 21.6{220}

13. NOZZLE-HOLDER 105048-3501

14. NOZZLE

105017-0850

15. NOZZLE SET

Include in #1:

101491-1330 as INJECTION-PUMP ASSEMBLY

101605-3350 as _

Cross reference number

BOSCH 9 400 614 322 9400614322

ZEXEL 101491-1330 1014911330

MITSUBISHI ME080515 me080515

Zexel num

Bosch num

Firm num

Name

101491-1330
101401-1540

9 400 614 322

ME080515 MITSUBISHI

INJECTION-PUMP ASSEMBLY
4D31T * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-4620

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 3.2 3.15 3.25

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point A

Rack position 10

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 52.4 51.4 53.4

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 8.2+-0.5

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 7.5 6.2 8.8

Max. variation between cylinders % 0 -14 14

Fixing the rack *

Injection quantity adjustment_03

Adjusting point C

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 64 64 69

Fixing the lever *

Rack limit *

Timer adjustment

Pump speed r/min 900

Advance angle deg. 0.5

Timer adjustment_02

Pump speed r/min 1100

Advance angle deg. 1.2 0.9 1.5

Timer adjustment_03

Pump speed r/min 1500

Advance angle deg. 3 3 3

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Supplied with torque spring not set. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting (6)At delivery (7)Rack difference between N = N1 and N = N2
----------
K=14 N1=1500r/min N2=400r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)At delivery (2)Stopper bolt setting
----------

----------
a=(24deg)+-5deg b=(18deg)+-5deg c=(2deg)

Stop lever angle

N:Pump normal S:Stop the pump. (1)At delivery
----------

----------
a=58deg+-5deg b=53deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(130deg)