101491-1230 ZEXEL 9 400 614 312 BOSCH INJECTION-PUMP ASSEMBLY 9400614312 1014911230 me080225


101491-1230 INJECTION-PUMP ASSEMBLY
Rating:
68
Buy INJECTION-PUMP ASSEMBLY 101491-1230 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 312 9400614312
ZEXEL 101491-1230 1014911230
MITSUBISHI ME080225 me080225

Service parts 101491-1230 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101049-9031
3. GOVERNOR 105402-2160
4. SUPPLY PUMP 105220-5180
5. AUTOM. ADVANCE MECHANIS 105676-0260
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-4050
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 21.6(220)
13. NOZZLE-HOLDER 105048-3010
14. NOZZLE 105017-0100
15. NOZZLE SET

Include in #1:

101491-1230 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 614 312 9400614312
ZEXEL 101491-1230 1014911230
MITSUBISHI ME080225 me080225


Zexel num
Bosch num
Firm num
Name
101491-1230 
9 400 614 312 
ME080225  MITSUBISHI
INJECTION-PUMP ASSEMBLY
4D31T * K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.2 3.15 3.25
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.7
Pump speed r/min   1250 1250 1250
Average injection quantity mm3/st.   51.2 50.2 52.2
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   8.2+-0.5
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   7.5 6.2 8.8
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   64 64 69
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   950--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   900
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   1.5 1.2 1.8
Remarks
Measure the actual speed.
 
Timer adjustment_04
Pump speed r/min   1250
Remarks
Measure the actual advance angle.
 
Timer adjustment_05
Pump speed r/min   -
Advance angle deg.   3 3 3
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101491-1230
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Supplied with torque spring not set. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting (6)At shipping
----------
K=15
----------

Speed control lever angle

Test data 101491-1230
F:Full speed I:Idle (1)At shipping (2)Stopper bolt setting
----------

----------
a=30deg+-5deg b=17deg+-5deg c=(2deg)

Stop lever angle

Test data 101491-1230
N:Pump normal S:Stop the pump.
----------

----------
a=27deg+-5deg b=53deg+-5deg

Timing setting

Test data 101491-1230
(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(130deg)




Have questions with 101491-1230?





Group cross 101491-1230 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 170 
ME080004 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 311 
ME080228 
INJECTION-PUMP ASSEMBLY
4D31T
 
ME080226 
INJECTION-PUMP ASSEMBLY
4D31T
101491-1230  
9 400 614 312 
ME080225 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 313 
ME080221 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 314 
ME080229 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 315 
ME080248 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 316 
ME080289 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 317 
ME080320 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 318 
ME080398 
INJECTION-PUMP ASSEMBLY
4D31T
Back to top