101491-0761 ZEXEL 9 400 614 307 BOSCH INJECTION-PUMP ASSEMBLY 9400614307 1014910761 8970798961


101491-0761 INJECTION-PUMP ASSEMBLY
Rating:
33
Buy INJECTION-PUMP ASSEMBLY 101491-0761 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 307 9400614307
ZEXEL 101491-0761 1014910761
ISUZU 8970798961 8970798961

Service parts 101491-0761 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101049-8870
3. GOVERNOR 105931-8672
4. SUPPLY PUMP 105210-6140
5. AUTOM. ADVANCE MECHANIS 105622-1630
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-4683
11. Nozzle and Holder 8-97119-858-0
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105048-3352
14. NOZZLE 105017-0610
15. NOZZLE SET

Include in #1:

101491-0761 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 614 307 9400614307
ZEXEL 101491-0761 1014910761
ISUZU 8970798961 8970798961


Zexel num
Bosch num
Firm num
Name
101491-0761 
101491-0762 
9 400 614 307 
8970798961  ISUZU
INJECTION-PUMP ASSEMBLY
4BE1 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4920
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.2 3.15 3.25
Rack position
Point A
  R=A
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   -
Rack position   10.4
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   52 50.4 53.6
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.9+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   12.5 11.2 13.8
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(10.4)
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   52 51 53
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1+0.15
Pump speed r/min   1750 1750 1750
Average injection quantity mm3/st.   64.5 61.3 67.7
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   78.5 62.5 94.5
Fixing the lever   *
Timer adjustment
Pump speed r/min   1425--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1375
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1750
Advance angle deg.   5 4.5 5.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101491-0761
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm.
----------
T1=G35
----------

Speed control lever angle

Test data 101491-0761
F:Full speed I:Idle (1)Stopper bolt set position 'H'
----------

----------
a=5.5deg+-5deg b=34.5deg+-3deg

Stop lever angle

Test data 101491-0761
N:Pump normal S:Stop the pump.
----------

----------
a=45deg+-5deg b=29deg+-5deg

Timing setting

Test data 101491-0761
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=17deg
----------
a=(90deg)




Have questions with 101491-0761?





Group cross 101491-0761 ZEXEL

Isuzu 

F 019 Z10 478 
8970754250 
INJECTION-PUMP ASSEMBLY
4BE1
 
8970754251 
INJECTION-PUMP ASSEMBLY
4BE1
 
8970754252 
INJECTION-PUMP ASSEMBLY
4BE1
F 019 Z20 449 
8971175590 
INJECTION-PUMP ASSEMBLY
4BE1
F 019 Z20 449 
8971175591 
INJECTION-PUMP ASSEMBLY
4BE1
F 019 Z10 479 
8970774910 
INJECTION-PUMP ASSEMBLY
4BE1
 
8970774911 
INJECTION-PUMP ASSEMBLY
4BE1
 
8970774913 
INJECTION-PUMP ASSEMBLY
4BE1
F 01G 09U 01S 
8970774912 
INJECTION-PUMP ASSEMBLY
4BE1
 
8970754240 
INJECTION-PUMP ASSEMBLY
4BE1
 
8970754241 
INJECTION-PUMP ASSEMBLY
4BE1
9 400 614 302 
8970754242 
INJECTION-PUMP ASSEMBLY
4BE1
9 400 610 525 
8970754243 
INJECTION-PUMP ASSEMBLY
4BE1
9 400 614 303 
8970930640 
INJECTION-PUMP ASSEMBLY
4BE1
 
8970930641 
INJECTION-PUMP ASSEMBLY
4BE1
F 019 Z10 160 
8970930642 
INJECTION-PUMP ASSEMBLY
4BE1
9 400 614 304 
8971175610 
INJECTION-PUMP ASSEMBLY
4BE1
9 400 610 526 
8971175611 
INJECTION-PUMP ASSEMBLY
4BE1
 
8970850670 
INJECTION-PUMP ASSEMBLY
4BE1
9 400 614 305 
8970850671 
INJECTION-PUMP ASSEMBLY
4BE1
 
8970850672 
INJECTION-PUMP ASSEMBLY
4BE1
F 019 Z10 161 
8970850673 
INJECTION-PUMP ASSEMBLY
4BE1
9 400 614 306 
8971175600 
INJECTION-PUMP ASSEMBLY
4BE1
9 400 610 527 
8971175601 
INJECTION-PUMP ASSEMBLY
4BE1
 
8970798960 
INJECTION-PUMP ASSEMBLY
4BE1
101491-0761  

101491-0762 
9 400 614 307 
8970798961 
INJECTION-PUMP ASSEMBLY
4BE1
9 400 610 528 
8970798962 
INJECTION-PUMP ASSEMBLY
4BE1
Back to top