101482-4510 ZEXEL 9 400 614 255 BOSCH INJECTION-PUMP ASSEMBLY 9400614255 1014824510 8970885990


101482-4510 INJECTION-PUMP ASSEMBLY
Rating:
36
Buy INJECTION-PUMP ASSEMBLY 101482-4510 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 255 9400614255
ZEXEL 101482-4510 1014824510
ISUZU 8970885990 8970885990

Service parts 101482-4510 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101048-9060
3. GOVERNOR 105400-8150
4. SUPPLY PUMP 105220-4742
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156637-5020
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-4065
11. Nozzle and Holder 8-94122-262-5
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105048-3890
14. NOZZLE 105017-1540
15. NOZZLE SET

Include in #1:

101482-4510 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 614 255 9400614255
ZEXEL 101482-4510 1014824510
ISUZU 8970885990 8970885990


Zexel num
Bosch num
Firm num
Name
101482-4510 
9 400 614 255 
8970885990  ISUZU
INJECTION-PUMP ASSEMBLY
4JB1 * K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-3-4-2
Pre-stroke mm   3.3 3.25 3.35
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.8
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   49.7 48.7 50.7
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   7.6+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   8 6 10
Max. variation between cylinders %   0 -15 15
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101482-4510
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Set idle sub-spring (4)Main spring setting
----------
K=7
----------

Speed control lever angle

Test data 101482-4510
F:Full speed I:Idle S:Stop
----------

----------
a=11deg+-5deg b=29deg+-5deg c=35deg+-3deg

Stop lever angle

Test data 101482-4510
N:Pump normal S:Stop the pump.
----------

----------
a=22.5deg+-5deg b=53deg+-5deg

Timing setting

Test data 101482-4510
(1)Pump vertical direction (2)Position of gear mark 'V' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=20deg
----------
a=(200deg)




Have questions with 101482-4510?





Group cross 101482-4510 ZEXEL

Isuzu 

 
8970840290 
INJECTION-PUMP ASSEMBLY
4JC1
9 400 614 254 
8970840291 
INJECTION-PUMP ASSEMBLY
4JC1
101482-4510  
9 400 614 255 
8970885990 
INJECTION-PUMP ASSEMBLY
4JB1
9 400 610 520 
8971378320 
INJECTION-PUMP ASSEMBLY
4JB1
Back to top