101482-4170 ZEXEL 9 400 614 224 BOSCH INJECTION-PUMP ASSEMBLY 9400614224 1014824170 8944559200

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101482-4170 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 224 9400614224

ZEXEL 101482-4170 1014824170

ISUZU 8944559200 8944559200

Service parts 101482-4170 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101048-8040

3. GOVERNOR 105400-4090

4. SUPPLY PUMP 105220-7270

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE 156637-3521

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-4061

11. Nozzle and Holder 8-94122-262-1

12. Open Pre:MPa(Kqf/cm2) 18.1(185)

13. NOZZLE-HOLDER 105048-3021

14. NOZZLE

105017-0050

15. NOZZLE SET

Include in #1:

101402-0400 as _

101482-4170 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 614 224 9400614224

ZEXEL 101482-4170 1014824170

ISUZU 8944559200 8944559200

Zexel num

Bosch num

Firm num

Name

101482-4170
101482-4180

9 400 614 224

8944559200 ISUZU

INJECTION-PUMP ASSEMBLY
4JB1 * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-3-4-2

Pre-stroke mm 3.3 3.25 3.35

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point A

Rack position 10.7

Pump speed r/min 1600 1600 1600

Average injection quantity mm3/st. 59.5 58.5 60.5

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 7.8+-0.5

Pump speed r/min 275 275 275

Average injection quantity mm3/st. 9.5 7.5 11.5

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Delivered with idle spring not operating. (3)Deliver without the torque control spring operating.
----------
K=15
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(124deg)+-5deg b=(29deg)+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=2.5deg+-5deg b=53deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of gear mark 'V' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(200deg)