Fuel injectors
  1. Home
  2. injection
  3. #1014820890

101482-0890 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014820890 1156000472


101482-0890 INJECTION-PUMP ASSEMBLY
Rating:
30
Buy INJECTION-PUMP ASSEMBLY 101482-0890 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101482-0890 1014820890
ISUZU 1156000472 1156000472

Service parts 101482-0890 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101048-0220
3. GOVERNOR 105510-8410
4. SUPPLY PUMP 105210-4251
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105661-3230
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-2010
11. Nozzle and Holder 9-15300-184-2
12. Open Pre:MPa(Kqf/cm2) 9.8{100}
13. NOZZLE-HOLDER 105031-2600
14. NOZZLE 105000-1130
15. NOZZLE SET

Include in #1:

101431-0850 as _
101482-0890 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101482-0890 1014820890
ISUZU 1156000472 1156000472


Zexel num
Bosch num
Firm num
Name
101482-0890 
 
1156000472  ISUZU
INJECTION-PUMP ASSEMBLY
DA220 * K 14BC PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-3-4-2
Pre-stroke mm   2.2 2.15 2.25
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-3 deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2 deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   13.5
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   61 59.6 62.4
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   13.5
Pump speed r/min   1300 1300 1300
Average injection quantity mm3/st.   70.3 67.9 72.7
Max. variation between cylinders %   0 -3 3
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   11.5
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   38 36.1 39.9
Max. variation between cylinders %   0 -4 4
Fixing the rack   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   10.5+-0. 5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   17.5 15.2 19.8
Max. variation between cylinders %   0 -13 13
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101482-0890
N:Pump speed P:Negative pressure (1)Pneumatic governor
----------

----------




Have questions with 101482-0890?





Group cross 101482-0890 ZEXEL

Isuzu 

101482-0800  

101482-4000 
 
9812009541 
INJECTION-PUMP ASSEMBLY
DA220
101482-0810  

101482-4020 
 
1156002050 

101482-0820  

101482-0980 
 
1156002060 

101482-0890  
 
1156000472 
INJECTION-PUMP ASSEMBLY
DA220
Back to top