Fuel injectors
  1. Home
  2. injection
  3. #1014729130

101472-9130 ZEXEL 9 400 614 202 BOSCH INJECTION-PUMP ASSEMBLY 9400614202 1014729130


101472-9130 INJECTION-PUMP ASSEMBLY
Rating:
70
Buy INJECTION-PUMP ASSEMBLY 101472-9130 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 202 9400614202
ZEXEL 101472-9130 1014729130

Service parts 101472-9130 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101047-8150
3. GOVERNOR 105410-3120
4. SUPPLY PUMP 105220-4050
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105151-4130
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 17.2{175}
13. NOZZLE-HOLDER 105081-3190
14. NOZZLE 105015-3730
15. NOZZLE SET

Include in #1:

101472-9130 as INJECTION-PUMP ASSEMBLY

Include in #2:

104749-1060 as _

Cross reference number

BOSCH 9 400 614 202 9400614202
ZEXEL 101472-9130 1014729130


Zexel num
Bosch num
Firm num
Name
101472-9130 
9 400 614 202 
   
INJECTION-PUMP ASSEMBLY
D0844 K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-3-4-2
Pre-stroke mm   1.5 1.45 1.55
Beginning of injection position
Governor side   NO.1
Difference between angles 1
Cal 1-3 deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2 deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   -
Rack position   10.8
Pump speed r/min   700 700 700
Each cylinder's injection qty mm3/st.   61.5 60 63
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.5+-0.5
Pump speed r/min   250 250 250
Each cylinder's injection qty mm3/st.   16.5 13.5 19.5
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   11+-0.5
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   63.3 62.8 63.8
Fixing the lever   *

Test data Ex:

Governor adjustment

Test data 101472-9130
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Idle sub spring setting: L1.
----------
K=8 L1=6.5-0.2mm
----------

Speed control lever angle

Test data 101472-9130
F:Full speed I:Idle (1)Fix idle side stopper bolt.
----------

----------
a=35deg+-5deg b=6deg+-5deg




Have questions with 101472-9130?





Group cross 101472-9130 ZEXEL

Daewoo 

101472-9100  
 
 
INJECTION-PUMP ASSEMBLY
D0844
101472-9110  
 
 
INJECTION-PUMP ASSEMBLY
D0844
101472-9130  
9 400 614 202 
 
INJECTION-PUMP ASSEMBLY
D0844

Daewoo 

101472-9140  
 
 
INJECTION-PUMP ASSEMBLY
D0844
101472-9170  
 
 
INJECTION-PUMP ASSEMBLY
495
Back to top