Fuel injectors
  1. Home
  2. injection
  3. #1014720030

101472-0030 ZEXEL F 019 Z20 447 BOSCH INJECTION-PUMP ASSEMBLY f019z20447 1014720030 5156003013


101472-0030 INJECTION-PUMP ASSEMBLY
Rating:
81
Buy INJECTION-PUMP ASSEMBLY 101472-0030 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z20 447 f019z20447
ZEXEL 101472-0030 1014720030
ISUZU 5156003013 5156003013

Service parts 101472-0030 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101047-8050
3. GOVERNOR 105410-2220
4. SUPPLY PUMP 105220-4772
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156612-8021
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105111-1190
11. Nozzle and Holder 5-15300-097-0
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER 105041-1100
14. NOZZLE 105000-1650
15. NOZZLE SET

Include in #1:

101401-0201 as _
101472-0030 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 019 Z20 447 f019z20447
ZEXEL 101472-0030 1014720030
ISUZU 5156003013 5156003013


Zexel num
Bosch num
Firm num
Name
101472-0030 
F 019 Z20 447 
5156003013  ISUZU
INJECTION-PUMP ASSEMBLY
C330 * K 14BC PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-3-4-2
Pre-stroke mm   2.2 2.15 2.25
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-3 deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2 deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.6
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   43 42 44
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   11.6
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   47.3 45.3 49.3
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   8.8+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   8.5 7.5 9.5
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.  

Test data Ex:

Governor adjustment

Test data 101472-0030
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)At rack cap installation: R1
----------
K=10 R1=(17.5)mm
----------

Speed control lever angle

Test data 101472-0030
F:Full speed I:Idle S:Stop
----------

----------
a=22deg+-5deg b=10deg+-5deg c=32deg+-3deg




Have questions with 101472-0030?





Group cross 101472-0030 ZEXEL

Isuzu 

101472-0000  
 
9812021910 

101472-0010  
 
9812021960 

101472-0030  
F 019 Z20 447 
5156003013 
INJECTION-PUMP ASSEMBLY
C330
101472-0040  
 
5156009032 
INJECTION-PUMP ASSEMBLY
C330
101472-0050  
 
5156011182 
INJECTION-PUMP ASSEMBLY
C330
101472-0060  

101472-0061 
 
8943864440 
INJECTION-PUMP ASSEMBLY
C240
101472-0061  
9 400 610 508 
8943864441 
INJECTION-PUMP ASSEMBLY
C240
101472-0070  

101472-0071 
 
8970233600 
INJECTION-PUMP ASSEMBLY
C240
101472-0071  
9 400 614 190 
8970233601 
INJECTION-PUMP ASSEMBLY
C240
101472-0080  

101472-0081 
9 400 610 151 
8970277050 
INJECTION-PUMP ASSEMBLY
C240
101472-0081  
9 400 610 509 
8970277051 
INJECTION-PUMP ASSEMBLY
C240
101472-0090  

101472-0110 
9 400 614 191 
8970316330 
INJECTION-PUMP ASSEMBLY
C240
Back to top