Fuel injectors
  1. Home
  2. injection
  3. #1014529200

101452-9200 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014529200


101452-9200 INJECTION-PUMP ASSEMBLY
Rating:
34
Buy INJECTION-PUMP ASSEMBLY 101452-9200 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101452-9200 1014529200

Cross reference number

ZEXEL 101452-9200 1014529200


Zexel num
Bosch num
Firm num
Name
101452-9200 
101452-9201 
 
  ISHIKAWAJIMA-S
INJECTION-PUMP ASSEMBLY
LEP854A *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-3-4-2
Pre-stroke mm   1.75 1.7 1.8
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-3 deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2 deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.5
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   36 35 37
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   7.8+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   8 7 9
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101452-9200
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK CAP: R1 (3)Torque control stroke: L1 (N = N1 and N = N2 rack difference).
----------
K=10 R1=(17.5)mm L1=0.65+-0.1mm N1=1000r/min N2=1250r/min
----------

Speed control lever angle

Test data 101452-9200
F:Full speed I:Idle S:Stop
----------

----------
a=16deg+-5deg b=35deg+-5deg c=32deg+-3deg




Have questions with 101452-9200?





Group cross 101452-9200 ZEXEL

Ishikawajima-S 

101452-9200  

101452-9201 
 
 
INJECTION-PUMP ASSEMBLY
LEP854A
101452-9201  
9 400 610 242 
131016820 
INJECTION-PUMP ASSEMBLY
LEP854A
101452-9210  

101452-9211 
 
 
INJECTION-PUMP ASSEMBLY
LEP854A
101452-9211  
 
131016840 
INJECTION-PUMP ASSEMBLY
LEP854A
101452-9220  

101452-9221 
 
 
INJECTION-PUMP ASSEMBLY
LEP854AT
101452-9221  
 
131016741 
INJECTION-PUMP ASSEMBLY
LEP854AT
Back to top