101452-3112 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014523112


101452-3112 INJECTION-PUMP ASSEMBLY
Rating:
25
Buy INJECTION-PUMP ASSEMBLY 101452-3112 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101452-3112 1014523112

Cross reference number

ZEXEL 101452-3112 1014523112


Zexel num
Bosch num
Firm num
Name
101452-3112 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-2-4-3
Pre-stroke mm   1.5 1.45 1.55
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cal 1-3
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   11
Pump speed r/min   1225 1225 1225
Average injection quantity mm3/st.   33.4 32.4 34.4
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   9.6+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   8 7 9
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 

Test data Ex:

Governor adjustment

Test data 101452-3112
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Rack difference between N = N1 and N = N2
----------
K=13 N1=1225r/min N2=1000r/min
----------

Speed control lever angle

Test data 101452-3112
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=15deg+-5deg b=28deg+-5deg

Stop lever angle

Test data 101452-3112
N:Pump normal S:Stop the pump.
----------

----------
a=26.5deg+-5deg b=53deg+-5deg

Timing setting

Test data 101452-3112
(1)Pump vertical direction (2)Position of key groove at No 1 cylinder's beginning of injection (3)Stamp aligning marks on the pump housing flange. (4)- (5)-
----------

----------
a=46deg18min+-3deg b=13deg42min+-30min




Have questions with 101452-3112?





Group cross 101452-3112 ZEXEL

Komatsu 

 
6204721340 
INJECTION-PUMP ASSEMBLY
4D95L
 
6202721150 
INJECTION-PUMP ASSEMBLY
4D95S
101452-3112  
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 610 271 
6202721151 
INJECTION-PUMP ASSEMBLY
4D95S
 
6204721421 
INJECTION-PUMP ASSEMBLY
4D95L
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 614 182 
6204721422 
INJECTION-PUMP ASSEMBLY
4D95L
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 614 183 
6202721211 
INJECTION-PUMP ASSEMBLY
4D95S
9 400 614 184 
6202721231 
INJECTION-PUMP ASSEMBLY
4D95S
 
6202721360 
INJECTION-PUMP ASSEMBLY
4D95S
9 400 614 185 
6202721370 
INJECTION-PUMP ASSEMBLY
4D95S
Back to top