101443-9130 ZEXEL F 019 Z10 961 BOSCH INJECTION-PUMP ASSEMBLY f019z10961 1014439130 16712na00c


101443-9130 INJECTION-PUMP ASSEMBLY
Rating:
20
Buy INJECTION-PUMP ASSEMBLY 101443-9130 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z10 961 f019z10961
ZEXEL 101443-9130 1014439130
NISSAN-DIESEL 16712NA00C 16712na00c

Service parts 101443-9130 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101044-8390
3. GOVERNOR 105419-4901
4. SUPPLY PUMP 105220-5740
5. AUTOM. ADVANCE MECHANIS 105670-0450
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105148-1221
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 9.8(100)
13. NOZZLE-HOLDER 105078-0050
14. NOZZLE 105007-1210
15. NOZZLE SET

Include in #1:

101443-9130 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 019 Z10 961 f019z10961
ZEXEL 101443-9130 1014439130
NISSAN-DIESEL 16712NA00C 16712na00c


Zexel num
Bosch num
Firm num
Name
101443-9130 
F 019 Z10 961 
16712NA00C  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
TD27 K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   2.15 2.1 2.2
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   12.5
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   50 49 51
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   8.7+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   8 6.9 9.1
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   C
Rack position   14++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   60 55 65
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   (N1+50)- -
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   N1(540)
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   (700)
Advance angle deg.   1.5 1.5 1.5
Timer adjustment_04
Pump speed r/min   (880)
Advance angle deg.   1.5 1.5 1.5
Timer adjustment_05
Pump speed r/min   900
Advance angle deg.   1.5 1 2
Timer adjustment_06
Pump speed r/min   -
Advance angle deg.   4 4 4
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101443-9130
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting (6)Rack difference between N = N1 and N = N2
----------
K=12 N1=900r/min N2=400r/min
----------

Speed control lever angle

Test data 101443-9130
F:Full speed I:Idle (1)Stopper bolt setting (2)Stopper bolt setting
----------

----------
a=(0deg)+-5deg b=(27deg)+-5deg

Stop lever angle

Test data 101443-9130
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=12deg+-5deg b=53deg+-5deg

Timing setting

Test data 101443-9130
(1)Pump vertical direction (2)Position of gear mark 'ZZ' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(100deg)




Have questions with 101443-9130?





Group cross 101443-9130 ZEXEL

Nissan-Diesel 

F 019 Z10 959 
16790NA00D 
INJECTION-PUMP ASSEMBLY
TD2714
F 019 Z10 960 
16712NA00A 
INJECTION-PUMP ASSEMBLY
TD2705
F 019 Z10 795 
16712NA00B 
INJECTION-PUMP ASSEMBLY
TD2705
101443-9130  
F 019 Z10 961 
16712NA00C 
INJECTION-PUMP ASSEMBLY
TD27
Back to top