101442-9200 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014429200


101442-9200 INJECTION-PUMP ASSEMBLY
Rating:
18
Buy INJECTION-PUMP ASSEMBLY 101442-9200 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101442-9200 1014429200

Cross reference number

ZEXEL 101442-9200 1014429200


Zexel num
Bosch num
Firm num
Name
101442-9200 
101442-9204 
 
  ISHIKAWAJIMA-S
INJECTION-PUMP ASSEMBLY
LEP854A *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   1.75 1.7 1.8
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.5
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   35.5 34.5 36.5
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   6.5+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   6 5 7
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101442-9200
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Idle spring not operating. (3)Idle sub spring setting: L1.
----------
K=15 L1=7-0.5mm
----------

Speed control lever angle

Test data 101442-9200
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=9deg+-5deg b=27deg+-5deg

Stop lever angle

Test data 101442-9200
N:Pump normal S:Stop the pump.
----------

----------
a=0deg+-5deg b=53deg+-5deg




Have questions with 101442-9200?





Group cross 101442-9200 ZEXEL

Ishikawajima-S 

101442-9200  

101442-9204 
 
 
INJECTION-PUMP ASSEMBLY
LEP854A
 
 
INJECTION-PUMP ASSEMBLY
LEP854A
 
131016950 
INJECTION-PUMP ASSEMBLY
LEP854A
9 400 614 163 
131016951 
INJECTION-PUMP ASSEMBLY
LEP854A
Back to top