Fuel injectors
  1. Home
  2. injection
  3. #1014420132

101442-0132 ZEXEL 9 400 614 160 BOSCH INJECTION-PUMP ASSEMBLY 9400614160 1014420132 8944465172


101442-0132 INJECTION-PUMP ASSEMBLY
Rating:
69
Buy INJECTION-PUMP ASSEMBLY 101442-0132 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 160 9400614160
ZEXEL 101442-0132 1014420132
ISUZU 8944465172 8944465172

Service parts 101442-0132 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101044-8220
3. GOVERNOR 105410-8712
4. SUPPLY PUMP 105220-7300
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156637-0121
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105141-2681
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 13.7(140)
13. NOZZLE-HOLDER 105071-1380
14. NOZZLE 105000-1860
15. NOZZLE SET

Include in #1:

101442-0132 as INJECTION-PUMP ASSEMBLY

Include in #2:

104761-0020 as _

Cross reference number

BOSCH 9 400 614 160 9400614160
ZEXEL 101442-0132 1014420132
ISUZU 8944465172 8944465172


Zexel num
Bosch num
Firm num
Name
101442-0132 
9 400 614 160 
8944465172  ISUZU
INJECTION-PUMP ASSEMBLY
4FC1 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-3-4-2
Pre-stroke mm   1.95 1.9 2
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-3 deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2 deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.2
Pump speed r/min   1300 1300 1300
Average injection quantity mm3/st.   34.6 33.6 35.6
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.5+-0.5
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   8 6.5 9.5
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.  

Test data Ex:

Governor adjustment

Test data 101442-0132
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Set idle sub-spring (3)Main spring setting
----------
K=13
----------

Speed control lever angle

Test data 101442-0132
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(21deg)+-5deg b=(113deg)+-5deg

Stop lever angle

Test data 101442-0132
N:Pump normal S:Stop the pump. (1)Use the hole at R = aa
----------
aa=27mm
----------
a=7.5deg+-5deg b=53deg+-5deg

Timing setting

Test data 101442-0132
(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=17deg
----------
a=(50deg)




Have questions with 101442-0132?





Group cross 101442-0132 ZEXEL

Isuzu 

101442-0100  

101442-0101 
 
8944465140 
INJECTION-PUMP ASSEMBLY
4FE1
101442-0101  
9 400 614 157 
8944465141 
INJECTION-PUMP ASSEMBLY
4FE1
101442-0110  

101442-0111 
 
8944465150 
INJECTION-PUMP ASSEMBLY
4FE1
101442-0111  
9 400 614 158 
8944465151 
INJECTION-PUMP ASSEMBLY
4FE1
101442-0120  

101442-0121 
 
8944465160 
INJECTION-PUMP ASSEMBLY
4FB1
101442-0121  
9 400 614 159 
8944465161 
INJECTION-PUMP ASSEMBLY
4FB1
101442-0130  

101442-0132 
 
8944465170 
INJECTION-PUMP ASSEMBLY
4FC1
101442-0131  

101442-0132 
 
8944465171 
INJECTION-PUMP ASSEMBLY
4FC1
101442-0132  
9 400 614 160 
8944465172 
INJECTION-PUMP ASSEMBLY
4FC1
Back to top