101441-9650 ZEXEL 9 400 619 751 BOSCH INJECTION-PUMP ASSEMBLY 9400619751 1014419650 1679090277


101441-9650 INJECTION-PUMP ASSEMBLY
Rating:
75
Buy INJECTION-PUMP ASSEMBLY 101441-9650 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 619 751 9400619751
ZEXEL 101441-9650 1014419650
NISSAN-DIESEL 1679090277 1679090277

Service parts 101441-9650 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101044-8290
3. GOVERNOR 105410-9820
4. SUPPLY PUMP 105220-4950
5. AUTOM. ADVANCE MECHANIS 105622-1650
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105148-1121
11. Nozzle and Holder 1660043G03
12. Open Pre:MPa(Kqf/cm2) 9.8{100}
13. NOZZLE-HOLDER 105078-0050
14. NOZZLE 105007-1130
15. NOZZLE SET

Include in #1:

101441-9650 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 619 751 9400619751
ZEXEL 101441-9650 1014419650
NISSAN-DIESEL 1679090277 1679090277


Zexel num
Bosch num
Firm num
Name
101441-9650 
101441-9651 
9 400 619 751 
1679090277  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
TD2304 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   2.3 2.25 2.35
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.7
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   38.6 37.6 39.6
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   8.1+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   8 6.9 9.1
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Timer adjustment
Pump speed r/min   550--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   500
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1500
Advance angle deg.   3 2.5 3.5
Timer adjustment_04
Pump speed r/min   1800
Advance angle deg.   4.5 4 5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101441-9650
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL (3)Set idle sub-spring (4)Main spring setting (5)Rack difference between N = N1 and N = N2
----------
K=8 RAL=14.7-0.3mm N1=1600r/min N2=1000r/min
----------

Speed control lever angle

Test data 101441-9650
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=34deg+-5deg b=26deg+-5deg

Stop lever angle

Test data 101441-9650
N:Pump normal S:Stop the pump.
----------

----------
a=12deg+-5deg b=53deg+-5deg

0000001501 GOV FULL LOAD ADJUSTMENT

Test data 101441-9650
Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Maximum no-load speed (r/min) LABEL9:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)At high idle rack position L
----------
L=6.2mm
----------
a1=A a2=B a3=C a4=- a5=- a6=- r1=1000r/min r2=1000r/min r3=1000r/min r4=- r5=- r6=- Q1=- Q2=38.6+-1mm3/st Q3=- Q4= Q5= Q6= c1=+-4% c2=+-4% c3=+-4% c4=- c5=- c6=- a7=36 a8=35 a9=34 a10=33 a11=32 a12=31 a13=30 a14=29 a15=28 a16=27 a17=26 a18=25 a19=24 a20=23 a21=22 a22=21 a23=20 a24=19 a25=- a26=- a27=- a28=- r7=1800r/min r8=1750r/min r9=1700r/min r10=1650r/min r11=1600r/min r12=1550r/min r13=1500r/min r14=1450r/min r15=1400r/min r16=1350r/min r17=1300r/min r18=1250r/min r19=1200r/min r20=1150r/min r21=1100r/min r22=1050r/min r23=1000r/min r24=950r/min r25=- r26=- r27=- r28=- R7=1935+-45r/min R8=1880+-43r/min R9=1825+-42r/min R10=1770+-41r/min R11=1720+-40r/min R12=1665+-38r/min R13=1610+-37r/min R14=1555+-36r/min R15=1505+-35r/min R16=1450+-33r/min R17=1395+-32r/min R18=1340+-31r/min R19=1290+-30r/min R20=1235+-28r/min R21=1180+-27r/min R22=1130+-26r/min R23=1075+-25r/min R24=1020+-23r/min R25=- R26=- R27=- R28=-

Timing setting

Test data 101441-9650
(1)Pump vertical direction (2)Position of gear mark 'ZZ' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=18deg
----------
a=(100deg)




Have questions with 101441-9650?





Group cross 101441-9650 ZEXEL

Nissan-Diesel 

 
1670090071 
INJECTION-PUMP ASSEMBLY
TD23
9 400 614 138 
1670090073 
INJECTION-PUMP ASSEMBLY
TD23
9 400 614 139 
1670090074 
INJECTION-PUMP ASSEMBLY
TD23
9 400 619 645 
1679090267 
INJECTION-PUMP ASSEMBLY
SD25T
F 01G 09U 01K 
1679090272 
INJECTION-PUMP ASSEMBLY
TD23
F 01G 09U 01L 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 619 982 
1679090276 
INJECTION-PUMP ASSEMBLY
TD23
101441-9650  

101441-9651 
9 400 619 751 
1679090277 
INJECTION-PUMP ASSEMBLY
TD2304
9 400 614 140 
1679090379 
INJECTION-PUMP ASSEMBLY
TD2304
 
1671290160 
INJECTION-PUMP ASSEMBLY
TD2305
 
1671290172 
INJECTION-PUMP ASSEMBLY
TD2305
9 400 611 741 
1671290200 
INJECTION-PUMP ASSEMBLY
TD2305
 
1671290161 
INJECTION-PUMP ASSEMBLY
TD2305
 
1671290173 
INJECTION-PUMP ASSEMBLY
TD2305
9 400 611 883 
1671290201 
INJECTION-PUMP ASSEMBLY
TD2305
9 400 614 141 
16700T8281 
INJECTION-PUMP ASSEMBLY
SD25
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1679090300 
INJECTION-PUMP ASSEMBLY
TD2704
Back to top