101433-9000 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014339000 16700y7505

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101433-9000 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101433-9000 1014339000

NISSAN-DIESEL 16700Y7505 16700y7505

Service parts 101433-9000 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101043-8450

3. GOVERNOR 105542-3091

4. SUPPLY PUMP

105220-5001

5. AUTOM. ADVANCE MECHANIS 105622-0240

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105141-1881

11. Nozzle and Holder 16600-20053

12. Open Pre:MPa(Kqf/cm2) 9.8{100}

13. NOZZLE-HOLDER 105071-1241

14. NOZZLE

105000-1080

15. NOZZLE SET

Include in #1:

101433-9000 as INJECTION-PUMP ASSEMBLY

101609-3570 as _

Cross reference number

ZEXEL 101433-9000 1014339000

NISSAN-DIESEL 16700Y7505 16700y7505

Zexel num

Bosch num

Firm num

Name

101433-9000

16700Y7505 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
SD20 * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 2.3 2.25 2.35

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point A

Rack position 11.6

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 34 33.1 34.9

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point B

Rack position 10.6

Pump speed r/min 1700 1700 1700

Average injection quantity mm3/st. 34.3 32.8 35.8

Max. variation between cylinders % 0 -4 4

Fixing the rack *

Injection quantity adjustment_03

Adjusting point C

Rack position 6

Pump speed r/min 1700 1700 1700

Average injection quantity mm3/st. 8 7.2 8.8

Max. variation between cylinders % 0 -7.5 7.5

Fixing the rack *

Injection quantity adjustment_04

Adjusting point D

Rack position 7.7

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 7.5 6.4 8.6

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Injection quantity adjustment_05

Adjusting point -

Rack position -

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 34 33.5 34.5

Remarks
Smoke setting

Timer adjustment

Pump speed r/min 500

Advance angle deg. 0.5

Timer adjustment_02

Pump speed r/min 550

Advance angle deg. 0.7

Timer adjustment_03

Pump speed r/min 700

Advance angle deg. 1 0.5 1.5

Timer adjustment_04

Pump speed r/min 900

Advance angle deg. 2 1.5 2.5

Timer adjustment_05

Pump speed r/min 1100

Advance angle deg. 3 2.5 3.5

Timer adjustment_06

Pump speed r/min 1300

Advance angle deg. 4 3.5 4.5

Timer adjustment_07

Pump speed r/min 1500

Advance angle deg. 5 4.5 5.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) P:Negative pressure (1)Pneumatic governor (2)Mechanical governor (3)Acting negative pressure: P1 (4)RACK LIMIT: RAL (5)Beginning of idle sub spring operation: L1 (6)Injection quantity Q = Q1 or less
----------
P1=3.24+-0.2kPa(330+-20mmAq) RAL=17mm L1=7.5+0.3mm Q1=3mm3/st
----------