Fuel injectors
  1. Home
  2. injection
  3. #1014320030

101432-0030 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014320030 5156004951


101432-0030 INJECTION-PUMP ASSEMBLY
Rating:
32
Buy INJECTION-PUMP ASSEMBLY 101432-0030 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101432-0030 1014320030
ISUZU 5156004951 5156004951

Service parts 101432-0030 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP
3. GOVERNOR 105520-6990
4. SUPPLY PUMP 105220-1571
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156612-6820
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105151-1451
11. Nozzle and Holder 5-15300-039-1
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER 105081-3141
14. NOZZLE 105000-1650
15. NOZZLE SET

Include in #1:

101432-0030 as INJECTION-PUMP ASSEMBLY
103864-0172 as _

Cross reference number

ZEXEL 101432-0030 1014320030
ISUZU 5156004951 5156004951


Zexel num
Bosch num
Firm num
Name
101432-0030 
 
5156004951  ISUZU
INJECTION-PUMP ASSEMBLY
C240 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left   L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left   L
Injection order   1-3-4-2
Pre-stroke mm   2.25 2.2 2.3
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-3 deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2 deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   -
Rack position   12.6
Pump speed r/min   1450 1450 1450
Average injection quantity mm3/st.   45.6 44.4 46.8
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.9+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   8 6.9 9.1
Max. variation between cylinders %   0 -14 14
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101432-0030
R:Rack position (mm) P:Negative pressure (1)Pneumatic governor (2)Torque control stroke (3)Beginning of idle sub spring operation: L1
----------
L1=6.5-0.5mm
----------




Have questions with 101432-0030?





Group cross 101432-0030 ZEXEL

Isuzu 

101432-0000  
 
5156001751 
INJECTION-PUMP ASSEMBLY
C240
101432-0010  

101432-0040 
 
5156002701 
INJECTION-PUMP ASSEMBLY
C240
101432-0020  
 
5156002731 

C240
101432-0030  
 
5156004951 
INJECTION-PUMP ASSEMBLY
C240
101432-0040  
 
5156005792 
INJECTION-PUMP ASSEMBLY
C240
101432-0050  
 
5156006910 

101432-0060  

101432-0150 
 
5156007440 

C240
101432-0070  

101432-0190 
 
5156007610 

C240
101432-0080  

101432-0171 
 
5156007511 
INJECTION-PUMP ASSEMBLY
C240
101432-0090  

101432-0161 
 
5156007471 

C240
Back to top