101431-0510 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data


Information injection-pump assembly

ZEXEL 101431-0510 1014310510
ISUZU 5156009161 5156009161


Cross reference number

ZEXEL 101431-0510 1014310510
ISUZU 5156009161 5156009161


Zexel num Bosch num Firm num Firm Name
101431-0510 
101431-0700 
  5156009161  ISUZU INJECTION-PUMP ASSEMBLY
C240 *

Calibration Data:



Adjustment conditions
Test oil   ISO4113 or {SAEJ967d}
1404 Test oil
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe mm   6-2-600
Outer diameter - inner diameter - length (mm)
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)   L
Left


Injection timing adjustment
Direction of rotation (viewed from drive side)   L
Left
Injection order   1-3-4-2
Pre-stroke mm   2.25 2.2 2.3
Beginning of injection position   NO.1
Drive side
Difference between angles 1 deg.   90 89.5 90.5
Cal 1-3
Difference between angles 2 deg.   180 179.5 180.5
Cal 1-4
Difference between angles 3 deg.   270 269.5 270.5
Cyl.1-2


Injection quantity adjustment
Adjusting point   -
Rack position   12.6
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   41.3 39.7 42.9
Max. variation between cylinders %   0 -4 4
Fixing the lever   *


Injection quantity adjustment_02
Adjusting point   -
Rack position   12
Pump speed r/min   1450 1450 1450
Average injection quantity mm3/st.   43 42 44
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *


Injection quantity adjustment_03
Adjusting point   -
Rack position   8.1+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   8 6.9 9.1
Max. variation between cylinders %   0 -14 14
Fixing the rack   *


Timer adjustment
Pump speed r/min   500+-50
Advance angle deg.   0 0 0
Remarks  
Start


Timer adjustment_02
Pump speed r/min   800
Advance angle deg.   1 0.5 1.5


Timer adjustment_03
Pump speed r/min   1050
Advance angle deg.   2 1.2 2.7


Timer adjustment_04
Pump speed r/min   1500
Advance angle deg.   4.5 3.9 4.9


Timer adjustment_05
Pump speed r/min   1750
Advance angle deg.   6 5.5 6.5
Remarks  
Finish

Test data Ex:



Governor adjustment

Test data 101431-0510 N:Pump speed R:Rack position (mm) P:Negative pressure (1)Pneumatic governor (2)Mechanical governor (3)Acting negative pressure: P1 (4)Injection quantity Q = Q1 or less
----------
Q1=3mm3/st
----------



Timing setting

Test data 101431-0510 (1)Pump vertical direction (2)Gear mark Z for the No. 4 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(60deg)





Have questions with 101431-0510?

toggle preview




Group cross number

Isuzu 

101431-0500 
101431-0550 
  5156009192  INJECTION-PUMP ASSEMBLY
C240
101431-0510 
101431-0700 
  5156009161  INJECTION-PUMP ASSEMBLY
C240
101431-0520    5156009591 
C240
101431-0530     
C240
101431-0540     
C240
101431-0550    5156009194  INJECTION-PUMP ASSEMBLY
C240
101431-0560      INJECTION-PUMP ASSEMBLY
C240
101431-0570      INJECTION-PUMP ASSEMBLY
C240
101431-0580 
101431-4210 
9 400 610 000  5156010232  INJECTION-PUMP ASSEMBLY
C240
101431-0590 
101431-0591 
  5156010252  INJECTION-PUMP ASSEMBLY
C240
101431-0591  9 400 610 499  5156010253  INJECTION-PUMP ASSEMBLY
C240